What is BRONZclay?
What is BRONZclay?
What Is BRONZclay? The material is a mixture of microscopic metal particles (11% tin and 89% copper) held together with an organic binder and water. Most of the water evaporates as the clay dries. The binder and remaining water burn away or evaporate during firing, and what remains is pure bronze metal.
Can bronze Clay be fired with a torch?
Firing bronze metal clay can be done in a kiln or with a hand torch. But remember that pieces of bronze metal clay that are larger than a 50 pence piece are much easier to fire in a kiln.
How to polish bronze clay?
Mix one tablespoon of Picklean with a glass of hot water and leave your piece in it for some time. Polish the piece with a burnisher, polishing papers, a tumbler or polishing motor. Using polishing compounds can give extra shine to your works. Prometheus Bronze Clay contains organic binder, water and bronze powder.
How do you fire metal clay?
Light your butane hand torch and set to a blue flame. Hold the torch about 2cm away from your design, moving the flame in a circular motion around the piece. Gradually move the flame closer to the PMC as you make that circular motion. As you heat the PMC you’ll notice that it will start to smoke and then catch fire.
Is Precious Metal clay real silver?
Precious Metal Clay (PMC) As a solid-phase sintered product of a precious metal powder used to form a precious metal article, the material consists of microscopic particles of pure silver or fine gold and a water-soluble, non-toxic, organic binder that burns off during firing.
What PMC can be torch fired?
Torch Firing PMC3, PMC Flex, PMC+ and 22K Gold Pieces the size and thickness of a 50p piece can be fired with a butane gas torch. Place the item on a torch block. Gently heat the piece, wait for the binder to burn off and the piece to glow a pale orange.
Which metal clays can be torch fired?
Fine silver clays can be fired with a small butane torch, an enameling kiln, a tabletop jewelry kiln, or a gas burner. Other metal clay types, such as bronze and silver alloy clays, require a carbon firing. Copper clay is the exception. Copper clay can be torch or kiln fired.
How do you polish silver clay after firing?
You can either use a dry brush or a add a little soapy water. Simply brush over the entire surface of the charm and you will very quickly begin to see the white disapper and silver begin to shine through. If you wish to achieve a matte or satin finish, you can simply leave the silver like this.
Is gold clay real gold?
Art Clay water-based gold clay, sometimes called metal clay or precious metal clay, is made by Aida Chemical Industries in Japan: it’s a composite clay-like material, made of 95% 22K gold and 5% water-based binder. This gold can be hallmarked as 22 karat gold, once fired it is 91.7% gold and 8.3% silver.