What is indoor wireless access point?

An access point is a device that creates a wireless local area network, or WLAN, usually in an office or large building. An access point connects to a wired router, switch, or hub via an Ethernet cable, and projects a Wi-Fi signal to a designated area.

How do I connect to Araknis WAP?

Connect your computer to the wired or wireless network and enter the IP address issued to the access point by the network. Use a network scanner (e.g. Fing) to sniff the network. The Araknis WAP manufacturer field will display Snap AV. Access the interface using the default IP address, 192.168.

How do I setup my wireless access point wirelessly?

Simply connect the access point to one of the ports of your existing wired/wireless router then configure the access point’s wireless settings.

Open the access point’s web-based setup page by entering the default IP Address “192.168.
On the web-based setup page, click on Wireless.
Enter the Network Name (SSID).

What does Araknis router do?

The Araknis Networks® router is perfect for high traffic networks. It has 4 Gigabit LAN interfaces with full Gigabit LAN-LAN speed. The router has embedded firewall for added network security, and also supports a plethora of VPN technologies to allow remote access to client network. Best of all, it’s OvrC enabled.

How do I find my WAP IP address?

Select Wi-Fi from the left sidebar and then click on Advanced on the right-hand side pane.

On the following screen, click on the TCP/IP tab at the top.
Your wireless access point IP should be listed next to Router. You can now use it to configure your network.

How do I log into Araknis router?

Type 192.168. 20.253 (the most common IP for Araknis Networks routers) in the address bar of your web browser to access the router’s web-based user interface. The default username for your Araknis Networks router is araknis. The default password is araknis.