What is mikrotik default IP?

What is mikrotik default IP?

Every router is factory pre-configured with the IP address 192.168. 88.1/24 on the ether1 port. The default username is admin with no password.

How do I access my RouterBOARD?

Logging into the router To access the router enter address 192.168. 88.1 in your browser. Main RouterOS page will be shown as in the screen shot below. Click on WebFig from the list.

How do I access my mikrotik console?

Accessing a serial device from within RouterOS Ctrl-A is the prefix key, which means that you will enter a small “menu” by pressing Ctrl-A. The Ctrl-A character will not be sent to your device! If you want to exit the connection to the serial device type Ctrl-A, then Q. This will return you to your RouterOS console.

How can I reset my mikrotik router IP address?

Mikrotik Factory Reset Guide

1. Disconnect the power cord from the unit.
2. Hold the reset button and do not release.
3. Plug the power cord in and wait until the ACT light starts flashing.
4. Now release the button to clear configuration.
5. Wait for a few minutes for the router to clear and restore the factory settings.

What is MikroTik router?

MikroTik (officially SIA “Mikrotīkls”) is a Latvian network equipment manufacturer. The company develops and sells wired and wireless network routers, network switches, access points, as well as operating systems and auxiliary software.

What is my routers IP?

Right-click the Start button then select Command Prompt. Step 2: On the Command Prompt window, enter “ipconfig” and press the [Enter]. The numbers indicated on the Default Gateway section is your router’s IP Address.

What is the default password for the MikroTik router?

How to Find MikroTik Default Password? Most MikroTik routers’ default username and password are admin and no password, with the default IP address being 192.168. 88.1. These MikroTik credentials are required to log into the MikroTik router’s web interface to make any configuration changes.

How do I connect to my MikroTik router?

To connect to the router enter IP or MAC address of the router, specify username and password (if any) and click on Connect button. You can also enter the port number after the IP address, separating them with a colon, like this 192.168. 88.1:9999. The port can be changed in RouterOS services menu.

How do I access MikroTik switch?

Connecting to the switch Open your web browser and enter IP address of your switch (192.168. 88.1 by default) and login screen will appear. SwOS default IP address: 192.168. 88.1, user name: admin and there is no password.

How do I reset my MikroTik Routerboard hex?

How to reset configuration

1. unplug the device from power.
2. press and hold the button right after applying power. Note: hold the button until LED will start flashing.
3. release the button to clear configuration.