What is the default IP address for AXIS Camera?

What is the default IP address for AXIS Camera?

192.168.0.90
The default IP address for the Axis cameras and video encoders is 192.168. 0.90. More information can be looked up here.

How do I reset my axis camera IP?

Reset Axis IP camera via hardware

1. Disconnect the power cable or PoE injector of the camera.
2. Press and hold the ‘Control’ button on the camera while reapplying power.
3. Keep the ‘Control’ button pressed until the ‘Status’ indicator color of the camera changes to amber.
4. Release the ‘Control’ button.

How do I make my axis camera default?

To perform a factory reset, do the following:

1. Power down the camera.
2. Hold down the control button, and with the button held down connect the power.
3. Keep the CTRL button held down until the LEDs on the front of the camera displays amber (this could take up to 15 seconds).

How do I manually assign an IP address to a camera?

Configuring the IP address of the camera

1. Open a web browser like Internet Explorer then enter the camera’s IP address in the Address bar.
2. Enter your camera’s User name and Password then click OK.
3. Click the Setup tab.
4. Click Basic located at the left side of the page.
5. Select the Configuration Type.

How do I factory reset my axis camera?

Axis Factory Reset

1. Disconnect the camera from the power supply and ethernet.
2. Remove the four screws securing the rear cover and remove it.
3. Keep the Control button pressed while you restore the power supply.
4. Hold down the button for about 15 seconds until the status LED is yellow flashing.
5. Release the Control Button.

What is the default password for Axis cameras?

Axis: Traditionally root/pass, new Axis cameras require password creation during first login (note that root/pass may be used for ONVIF access, but logging into the camera requires root password creation) Basler: admin/admin.

What is the default IP address for the Axis M10 series?

Page 10 AXIS M10 Series. Assign an IP address. Most networks today have a DHCP server that automatically assigns IP addresses to connected devices. If your network does not have a DHCP server, the Network Camera will use 192.168.0.90 as the default IP address.

What are the features of the Axis m1054 network camera?

•Megapixel Resolution (AXIS M1054) The AXIS M1054 Network Camera offers superior image quality in megapixel resolution with progressive scan, providing crisp and clear images of both illuminated and dark areas. •PoE (Power over Ethernet) (AXIS M1054)

Does Axis offer support after the product discontinuation date?

! Discontinued product. Support expires 2022-02-17. After this date, please see the product documentation and support pages for self-help resources. note Please note that products shipped from Axis to the original purchaser after the product discontinuation date may come with a limited hardware warranty.

How do I stay updated on warranty coverage for Axis products?

Please stay updated on warranty coverage when buying products after their final order date by consulting the Axis 5-year limited hardware policy. For full specifications, check the recommended replacement product datasheet by using the link (s) above.