What is the difference between Victron blue solar and SmartSolar?

The SmartSolar has BT that is the only difference. With the SmartSolar you have BT and a VE. direct port to connect it to a GX device. With the BlueSolar you can have BT or a connection to a GX device.

What is MPPT solar charger?

An MPPT, or maximum power point tracker is an electronic DC to DC converter that optimizes the match between the solar array (PV panels), and the battery bank or utility grid.

Can you use a MPPT solar charge controller?

Use an MPPT solar charge controller with a higher input voltage rating such as the Victron 150V/45A. Or a much easier option 2 – Connect the panels in parallel instead of series, so the maximum voltage will now be around 46V + 5V = 51 Voc, no worries if you are using a 12V or 24V battery system.

Can I use MPPT without battery?

According to your question no, we can not use the solar charge controller(Solar Charge Controllers – Mppt or PWM Charge Controller ) for a solar system without battery and inverter to drive DC Loads.

Are Victron MPPT waterproof?

The MPPT 70/15 also allows setting with a fixed disconnect voltage. Waterproof, compact enclosure, low investment The recognisable blue Victron Energy enclosure is light (500 gr.), waterproof and does not warm up. The MPPT 70/15 will automatically adjust to a 12V or a 24V system.

Can Victron MPPT charge lithium?

BlueSolar 75 VOC, 15 Amp MPPT solar panel charge controller for 12V and 24V battery systems including Lithium.

Can MPPT work without inverter?

An inverter without an MPPT circuit would result in sub-par or non-optimal operating conditions between any PV module (or string of modules) and the inverter. Unless the inverter can match the strings to extract maximum power the result is a lower efficiency operation for the connected strings.

How does the bluesolar 150/70-mppt charge controller charge the battery?

The BlueSolar 150/70-MPPT charge controller is able to charge a lower nominal- voltage battery from a higher nominal voltage PV array. The controller will automatically adjust to a 12, 24, or 48 V nominal battery voltage.

How does the MPPT ve-can smartsolar Charger work?

The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model.

What is the battery voltage of the smartsolar charge controller?

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

What is the victron remote management portal (VRM)?

If the GX device is connected to the internet, the Victron Remote Management Portal ( VRM) provides access to the full power of your solar charger (s). For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520.