What is the height of a drinking fountain?

It should be a maximum of 36 inches from the floor or ground. If the water fountain is primarily used by children, the maximum height is 30 inches. The water should flow at least 4 inches high so that a cup or glass can be inserted.

How do you drain a drinking fountain?

Disconnect 3/8″ water line from shutoff valve. Depress the push-button and blow compressed air into the 3/8″ water inlet line through entire cooler water system until only air comes out of the bubbler. Remove the trap from the drain line and empty any water.

Do drinking fountains need a drain?

As Sannes explains, he was informed by the city that “you can’t spit in the river.” The outdoor fountain would need to drain into a sewer pipe, just like a plumbing fixture inside a house.

Do bottle fillers count as drinking fountains?

Water coolers and bottle fillers can be provided in addition to, or be integrated with, drinking fountains.

How do you fix a water fountain that won’t stop running?

The way you check this is to push the push bar, let it go, and when the water continues to run, unplug the water cooler. If the water continues to run your solenoid is “stuck on,” and is bad. You need to replace the solenoid. If it does turn off when you unplug it, then it is one of the switches, not the solenoid.

Does a bottle filler count as a drinking fountain?

It will fill a bottle but also serve as a drinking fountain. If you are wondering whether a combination drinking fountain/bottle filler can count as two fixtures for meeting the plumbing code requirements, the answer is no. Only one person can use the combined fixture at a time. Therefore, it is one fixture.

Do you have to have a high low drinking fountain?

The IBC, however, requires each of these tenants to have either two drinking fountains or a high-low drinking fountain. Technical criteria for drinking fountains are given in ICC A117.1-2003 Accessible and Usable Buildings and Fa- cilities, Section 602.

How tall do drinking fountains have to be for wheelchairs?

Where drinking fountains are primarily for children’s use, drinking fountains for people using wheelchairs shall be permitted to comply with the children’s provisions in ICC A117.1 and drinking fountains for standing children shall be permitted to provide the spout at 30 inches (762 mm) minimum above the floor.

How many drinking fountains are required in a building?

In the meantime, whenever you see a drinking fountain on a set of plans, start thinking two drinking fountains, not one. If the engineer or architect only shows one drinking fountain, give the engineer or architect a call and ask about the building code requirement for two drinking fountains.

Do you have to scoping for drinking fountains?

Scoping for drinking fountains applies separately to each floor of a facility, secured area, and exterior site that contains drinking fountains. In each such location with drinking fountains, half of the units must be wheelchair accessible and the other half accessible for standees.

How to find out if your drinking fountain has a leak?

Find the model number on the drinking fountain or water cooler and we will be able to find the correct valve for you. My drinking fountain or water cooler has an internal leak. There are a few common spots internally where a drinking fountain or water cooler leaks. The drain gasket, cooling tank and push in fittings are the most common.