What is the oil ratio on a Homelite Weed Eater?

50 to 1
Homelite recommends using their oil at a 50 to 1 gas to oil ratio in their 2 cycle weed eaters. That is about 2.6 oz of oil added to each gallon of gas.

What is the fuel mixture for a Homelite chainsaw?

50-to-1 ratio
It has a two-stroke engine similar to newer models made by Homelite. The recommended fuel mixture is a 50-to-1 ratio of unleaded gasoline and two-cycle engine oil, and the manufacturer recommends the use of a two-cycle oil that contains fuel stabilizer to keep the mixture fresh if you are not using it immediately.

What should the oil and gas ratio be for A weedeater?

Efficient operation requires the correct mix of gas to oil. Too much oil can foul the engine but too little will greatly shorten engine life because of insufficient lubrication. The correct fuel/oil ratio varies from one manufacturer to the next.

What is the gas-oil mix for a Featherlite SST Weed Eater?

1 What Is the Gas-Oil Mix Ratio for a Featherlite SST Weed Eater? The two-cycle gas engines used on many string-type weed trimmers require a mixture of gasoline and oil to keep the crankshaft and piston lubricated. Efficient operation requires the correct mix of gas to oil.

How much oil to put in a weed trimmer?

Shake It Up. Mix 3.2 oz. of engine oil with 1 gallon of regular gasoline. Because the oil will separate from the gasoline over time, thoroughly shake your oil and gas mixture before refueling your weed trimmer.

What kind of oil to mix with gas for a weed eater?

Mixing Gas and Oil The correct ratio of gas-to-oil mixture for Weed Eater line trimmers is 1 part oil to 40 parts gasoline. The best method of mixing is to start by adding 1 gallon of regular unleaded gasoline to a gas can. Then pour in a 3.2-ounce bottle of good quality, synthetic 2-cycle air-cooled engine oil.

What should the gas to oil ratio be on a weed eater?

Some models, such as Stihl, require a ratio of 50:1, while others, including Weed Eater, require a 40:1 mixture and still others, including Ryobi, run on a 32:1 mixture. Check your owner’s manual to make sure you’re mixing in the proper ratio. Otherwise, you could harm the engine.

What should the oil to gas ratio be on a Homelite chainsaw?

The recommended oil-to-gas ratio for a Homelite chainsaw, and most other brands of chainsaws, is a 50-to-1 mixture of 2.6 ounces of two-cycle chainsaw oil and 1 gallon of unleaded gasoline. The gasoline should be at least 87 octane.