What is too hot for a wood stove?

When the temperature reaches 1,100 degrees Fahrenheit, these gases and the smoke generated from the reaction will burn, if they have enough oxygen with which to react. The charcoal remaining from the reaction will burn at temperatures above 1,100 degrees Fahrenheit.

Is 600 degrees too hot for wood stove?

It’s fine to use “high burn” mode to get things going, but after things start to warm up, you want to be using the “low burn” mode to maintain the temperature and maximize each log’s energy potential. Recommended wood stove temperature range is between 110 to 250 degrees Fahrenheit.

How hot can I run my wood stove?

The best working range for wood stoves is normally 500 up to 700 degrees Fahrenheit (260 – 370 C) (this is the stove top temp.). That being said, this is only a general rule of thumb; all stoves are different. Some run best at 400. Other types perform optimally only when close to 500 degrees.

Can a wood stove fire get too hot?

Burning a wood stove too hot for extended periods of time on a regular basis can damage some components of the stove in the long run, while building fires too small for your stove can lead to an inefficiently burning fire.

Is it safe to leave wood stove burning at night?

Yes, you can leave a wood burning stove on overnight. I have done this many times as have other people I know. However, you need to be careful about ventilation. Typically, if you are leaving a wood burning stove on overnight, you will close off both the air intake and the flue, so that the wood burns very slowly.

How hot can a cast iron wood stove Get?

200°F
Cast iron stove and fireplace insert break-in procedure. 1. Light a small fire of newspaper and kindling. Only allow the stove to reach a maximum surface temperature of 200°F (93° C).

Is it safe to burn pallets in a wood stove?

Pallets, lumber, and other cut and dried scrap wood are indeed good to burn (as long as you are completely sure they were not treated with any chemicals such as arsenic or methyl bromide, which are very hazardous when burned).

What should the temp of a wood stove be?

To bring the temperature of the stove back down to ‘best operation’ temperatures of under 470°F (240°C), we closed down the vents to reduce the oxygen supply, and didn’t add any further wood to the fire. The temperature ranges shown on our stove’s thermometer are explained below.

What should flue temp be on Osburn stove?

Just a quick question in regards to flue temperatures for wood stoves. I have an Osburn 2200 freestanding wood stove going into about 4 feet of double wall stove pipe and then into 6″ stainless chimney. My manual for the stove states not to let the stove top thermometer exceed 850 F…which mine doesn’t.

How can you tell if your wood stove is safe?

The temperature of the flue gases flowing up the chimney from your wood stove is a good measure of how safe your wood-burning practices are. Installing a flue gas thermometer is inexpensive and an easy task to accomplish resulting in exactly knowing what’s happening in your stove – at least temperature-wise.

When to stop stoking the fire on a wood stove?

When over 900 degrees it is time to stop stoking the fire and turn down the damper. Between 400 and 900 Degrees F: This is the cozy temperature for a wood stove.

What should the temperature be on a wood stove?

Do you need an insulated chimney for a wood burning stove?

Built-in, high-efficiency fireplaces and wood-burning stoves are capable of extremely high temperatures. So, they need insulated chimneys to maintain safe temperatures for surrounding combustible materials. Third-party companies manufacture many insulated chimney systems, rated for specific appliances.