What kilowatt is a Potterton Suprima 40?

11.7kw
The Potterton Suprima 40L has a SAP seasonal efficiency rating of 78.5%. The Suprima 40L is a Non-Condensing Conventional boiler with a maximum power output of 11.7kw that uses Gas as its fuel source.

What is the phone number for Potterton Suprima 30-100l?

POTTERTON G.C. No. 41 590 42 9016BOILER CODE No. ALVG101 0003 SUPRIMA 30 L SUP263A

Is the Potterton Suprima boiler in a cupboard?

The boiler we saw was in a garage, not enclosed in a cupboard. It clearly still had the old style circuit board, in fact one of the earliest circuit boards fitted to the Potterton Suprima, with a membrane panel which has to be pressed to re-set the boiler if it locks out.

What is the seasonal efficiency of Potterton Suprima?

Model Seasonal Efficiency (SEDBUK) (%) 30L 78.0 40L 78.5 50L 78.1 60L 78.1 70L 78.6 80L 78.8 100L 78.0 This value is used in the UK Government’s Standard Assessment Procedure (SAP) for energy rating of dwellings. The test data from which it has been calculated have been certified by 0063. 4Publication No. 5102696 Introduction

Can a Potterton Suprima be used with G20 gas?

About the BoilerSee inside cover for models covered by these instructions. This is a Wall Mounted Fan Assisted Balanced Flue Gas Boiler. This boiler is for use with Natural Gas (G20) only at 20mbar and for use in GB & IE. About SafetyThe Gas Safety (Installation and Use) Regulations 1998.

Is the Potterton Suprima 40l gas boiler condensing?

The Suprima 40L is a Non-Condensing Conventional boiler with a maximum power output of 11.7kw that uses Gas as its fuel source. We recommend that you upgrade to a new, more efficient boiler to help reduce fuel bills and carbon dioxide emissions.

Are there any problems with the Potterton Suprima?

They came in many heat output sizes from 30,000 BTUs right up to 120000 BTUs and all in the same size case. The 120s were recalled a few times due to problems and eventually withdrawn, but all in all, they were a good boiler. The Potterton suprima had its faults though and one of them was the PCB or otherwise known as the printed circuit board.

What does flashing red mean on Potterton Suprima boiler?

I can’t remember now.) The Potterton Suprima Replacement PCB Kit manual says that flashing red 3 times/sec indicates an air pressure switch (APS) fault or a flow switch fault. We opened the boiler up to check if a flow switch was fitted (sometimes called a dry fire switch) but there was none on this boiler.

Are there any problems with the Potterton 120?

The 120s were recalled a few times due to problems and eventually withdrawn, but all in all, they were a good boiler. The Potterton suprima had its faults though and one of them was the PCB or otherwise known as the printed circuit board.