What paperwork should I get with a new boiler?

A boiler Gas Safe Certificate provides confirmation that your appliance was installed by a suitably qualified heating engineer. You should receive your copy in the post a few days after the boiler was installed. This certificate will need to be kept in a safe place.

Can you use a new boiler straight away?

As an approximate, a brand new system will usually take one to two weeks as it will involve lifting carpets, flooring and floorboards, laying pipework, and installing radiators. The good news is that this can be carried out at the same time as the boiler installation.

Do you need building regs for new boiler?

Replacing Boilers Work to install a new boiler (or a cooker that also supplies central heating – Aga, Raeburn etc) needs Building Regulations approval because of the safety issues and the need for energy efficiency. This is generally achieved by employing an installer who is registered under an approved scheme.

Do you need to turn water off to change boiler?

A combi boiler should shut down automatically if it detects a drop in mains pressure or if the temperature inside the system gets too high, as would happen without a supply of cold water. Unless you turn on a hot tap, the system will carry on running as if nothing has happened.

Do I need a boiler installation certificate to sell my house?

Must I have a gas boiler safety certificate to sell my house? If you have a gas boiler in your current home, you will not need a safety certificate as a prerequisite to selling your house. Even then, having safety checks and annual inspections done annually is recommended for your own safety.

What happens if your boiler is not registered?

If your gas boiler wasn’t registered with Gas Safe Register at the time of installation, we would advise that you contact the installer to notify the appliance, providing they can still do so.

Is British Gas boiler installation expensive?

Our Verdict on British Gas In our experience, British Gas is one of the more costly boiler installation companies. Those looking for a system boiler can expect to pay between £2,000 and £3,000 for a smaller home.

How long does it take to fit a boiler British Gas?

On average, a new boiler installation can take between 1-3 days depending on the complexity of the job. You should also set aside time for your survey appointment, which will take place prior to your installation.

Is it OK to put boiler in garage?

Garage. Your garage (if you have one) could also be a suitable location for your boiler. However, as is the case with loft boiler installations, you will need to ensure that your system has frost protection and pipe insulation as this area can get cold, especially in the winter.

Can you turn off the water and keep the central heating on?

When your water supply is interrupted you can usually continue to use your central heating as normal. Most central heating systems are operated by a closed system. A coil inside the boiler ensures that central heating can operate without an incoming water supply.

What certificates are required to sell a house?

What certificates do I need to sell my house?

Management Information Pack.
Proof Of Identity.
Shared Freehold/Leasehold Documentation.
Energy Performance Certificate (EPC)
Property Title Deeds.
Fittings and Contents Form.
Property Information Form.
FENSA Certificate For Doors And Windows.

When do you need to tell building control about a new boiler?

Any new or replacement gas appliance installed after 1 st April 2005 is subject to Building Regulations. If, for example, a gas fire, gas hob or central heating boiler has been installed, notification to Building Control is required to ensure that the installation conforms to Building Regulations.

Do you get a certificate when you install a boiler?

Your installer should do this for you, and you should receive the following certificate: If your boiler is installed by a Gas Safe Register/CORGI-registered or OFTEC-registered installer, you will get a ‘building regulations compliance’ certificate from Gas Safe Register/CORGI or OFTEC after the work has been completed.

What do you need to know to replace a gas boiler?

Trusted Trader, all of whom have passed our stringent standards to become accredited. To replace a gas boiler, the installer must be Gas Safe registered – so ask to see a registration card, or check the Gas Safe Register.

Do you need a registration card to replace a gas boiler?

To replace a gas boiler, the installer must be Gas Safe registered – so ask to see a registration card, or check the Gas Safe Register. But we also think that you, the customer, have an important role in getting across to the installer exactly what it is you want from your new boiler.

What do you need to know when replacing a boiler?

Whether you are designing or installing a boiler, there are certain things that you should know when replacing the heating plant. Consider it your due diligence. The most important part of any boiler retrofit is the boiler room walkthrough. You must see the system that the new boiler will be joining.

When do I need to tell my local authority about a new boiler?

Your local authority must be told when you have a new or replacement boiler fitted. Your installer should do this for you, and you should receive the following certificate:

What should I look for in a boiler retrofit?

Consider it your due diligence. The most important part of any boiler retrofit is the boiler room walkthrough. You must see the system that the new boiler will be joining. This includes electrical, flue, and most importantly, piping. So, what is in the boiler room?