What should I do after shocking my pool?

Test the water 24 hours after shocking and start adjusting pH and alkalinity levels. The chlorine will still be elevated, but over a few days it should stabilize. To lower the chlorine level, you could add sodium thiosulfate, but I do not recommend this, because adding too much can cause the chlorine level to seesaw back and forth.

Why is my Pool Green and cloudy even after shocking?

Just to summarize my experience: a bad filter is the most common cause of cloudy pool water. Green pool water is caused by a bad chemical balance, usually something other than just low chlorine. 1. I Shocked My Pool, So Why Is It Still Cloudy? If your pH is not too high, filtration issues are likely the cause of your cloudy pool.

What should the sweet spot be for pool water?

The “sweet spot” is between 1 and 3 ppm (parts per million). This keeps your water clean but also prevents it from becoming cloudy — assuming everything else is balanced. Exactly how much depends on how often your pool is used, how busy it gets, and the weather it’s exposed to.

Why does my pool have no chlorine Reading after adding?

Too Much Organic Material In Your Pool One of the causes of a high chlorine demand is an excessive buildup of algae and phosphates. Although you’re adding chlorine to your water, bacteria or algae are overpowering the chemicals causing it not to show up on tests strips or in water kits.

Is it safe to have pool in spring?

“Routine maintenance and seasonal operations of pools such as spring openings should also continue to combat other potential issues such as stagnant water, which could create further waterborne viruses and the breeding of disease carrying insects such as mosquitoes.”

Is the Betz pool and Spa still open?

Another precaution the company has taken is closing its store. They are encouraging customers to place orders online and they will deliver. Customer water samples can also be left at the store entrance and Betz Pools will email the test results. “So far, so good,” said Blanchet.

How much chlorine do you need to shock a pool?

Start by testing the FAC (Free Available Chlorine) concentration of the pool. Testing would typically help you to determine how much you’ll have to raise the chlorine level. For cloudy or green waters, you would need to shock the pool by raising the chlorine level to 10 ppm or more.

Why is my pool still green after shock and Floc?

3 lb bags of 70% chlorine added, scrubbed the pool with the brush, and back washed…a lot. Psi in the filter is down to 10psi which is good. But I’ve still got a lot of green. I’ve calculated the pool size in gallons to 16k-18k gallons and I’ve added nearly double the amount of chlorine for that amount.

What should I do if my pool Won’t Hold chlorine?

Backwash the filter of the pool. Also, vacuum any sediment you find on the bottom. Doing this will ensure that a significant part of the added chlorine stays available in the pool water for lenthier period of time. If possible it is always best to vacuum and backwash if you are using a sandfilter prior to adding new chemicals.

Can you put a non chlorine shock in a pool?

Non-chlorine shock oxidizes the water, restoring the balance and making it cleaner. To determine how much shock to add, you will use this formula: After adding the shock to the pool, wait a few hours and test again. Repeat the process if necessary. 3. Chlorine shock

Why does my Pool turn green after shock chlorine?

When shock chlorine oxidizes the copper, it turns green and that’s what you’re seeing in the pool. To get rid of it you’ll need to raise the pool’s calcium hardness by adding calcium chloride. The other culprit can be high levels of pollen.

What’s the best way to fix a green pool?

Here’s a quick summary of how to fix a green pool: 1 Lower your swimming pool’s pH 2 Shock the pool 3 Add flocculant 4 Vacuum the pool 5 Add an algaecide