What should I do if I have a problem with my toilet?

Inspect the area where you’ll be working to identify the toilet problem. Have a bucket or towels on hand to catch or wipe up water. Frequently when working with plumbing parts and repair matters, you’ll need to turn off the water supply valve and flush the toilet to empty the tank. Disconnect the supply line from the tank.

What causes a toilet to malfunction or wear out?

Toilets operate on a relatively simple design, but as plumbing fixtures that see frequent use, their components can malfunction or wear out over time. This guide reviews some of the most common toilet problems you can easily fix. Item (s) have been added to cart.

What to do when your toilet tank won’t fill up?

Turn off water supply and flush the tank. Reach inside the tank with your right hand under the float cup and lift it up. With your right hand hold onto the gray shaft keeping the float cup all the way up. Do not allow the float cup to drop or valve shaft to turn.

How to fix a running toilet flush button?

Twist both the cap and plastic arm counterclockwise 1/8th turn. Press down on the cap while making a quick twisting motion. Lift up on cap and move away from top of valve body. Using a cup hold the cup upside down over the exposed opening of the valve and turn on the water supply full force for 10-15 seconds.

Do you need to call a plumber for a clogged toilet?

Unclogging a Toilet BanksPhotos/Getty Images. A clogged toilet is probably one of the most common toilet problems you’ll encounter, but in most cases, there is no reason to call a plumber. A specialized toilet plunger with an internal cup or flange will handle most clogs.

Can a toilet handle be repaired without a bowl?

With only a few exceptions, there aren’t many repairs that involve the bowl. The tank, on the other hand, is where two important valves are located, as well as the handle that initiates the flush action. Here is where most of the toilet repairs occur.

What causes a toilet to run on its own?

A deteriorated flapper valve can cause your toilet to flush on its own or to run constantly, which could make your water bill skyrocket. There are two basic reasons a flapper valve malfunction:

What causes water to trickle from toilet to bowl?

A worn-out flapper will cause water to constantly trickle from the tank to the bowl. Remove the flapper by disconnecting the flapper chain from the flush handle lever. Slide the flapper off the pegs that extend from the sides of the flush valve tube.

What should I do if my toilet plunger is not working?

When using a plunger, make sure the toilet bowl contains enough water to submerge the head of the plunger. Place the plunger over the hole in the toilet bowl, maintain a seal and plunge up and down rapidly, keeping the plunger under the water level. Be prepared for multiple plunge cycles or dozens of plunges per cycle.

Where does the water go when you flush the toilet?

The user depresses the flush handle. The toilet handle is attached to an arm inside the toilet tank, which raises a flapper. The raised toilet flapper releases water from the tank into the toilet bowl. The water flushes the waste through the toilet bowl’s trap and into the drain and sewer lines.

When to call a plumber for a clogged toilet?

Existing problems with your main drain and sewer lines can also cause clogging. If you have an old drain line, you can expect regular waste and other non-flushable items to accumulate. In severe cases, a clogged main sewer line can cause multiple toilets to clog up. When this happens, you need to call a licensed plumber to take over.

Is there a way to stop going to the toilet at night?

The good news is that there are several natural solutions to stopping this problem. If it’s a severe medical issue, you may need the help of a doctor. But, more often than not, a full treatment plan can help you to stop going so much through the night. This guide will help you to identify a few possible causes of nocturia.