What should the bar pressure be on a Ferroli?
What should the bar pressure be on a Ferroli?
1. Switch off the boiler. Ensure that there is no water pressure in the system. 2. On top of the expansion vessel (grey object with standard tyre valve on top, viewable from the top of the boiler) inflate with a bike or car pump to 1.5 bar (22 psi) 3. Charge your water system pressure to 1.0 to 1.5 bar. 4. Start your boiler
Is the expansion vessal passing the Ferroli filling loop?
no! your expansion vessal has had it. either that or your filling loop is passing. but chances are as its a ferroli it will be the expansion vessal.
What causes a Ferroli boiler to lose pressure?
If your Ferroli boiler is losing pressure, but you’ve checked there are no leaks coming from the radiators and no water discharging from the pressure relief valve, it’s usually a problem with the expansion vessel which will need to be repressurised.
Where is the pressure gauge on a Ferroli combi boiler?
valve is usually to the right looking at the boiler from front above the boiler, firstly drain water from the radiator system so pressure gauge reads zero, then use a footpump or bike pump to pressurize the vessel to 1 bar (14psi). Refil the radiators via your filling loop. problem fixed.
If your Ferroli boiler is losing pressure, but you’ve checked there are no leaks coming from the radiators and no water discharging from the pressure relief valve, it’s usually a problem with the expansion vessel which will need to be repressurised.
What makes a Ferroli water heater so good?
All Ferroli water heaters are built with maximum attention to reliability and comfort, along with utmost care for the environment, thanks to the recyclable components they are made with. Icons here below sum up some peculiarities of the di˚ erent models shown in the following pages.
Is it worth it to replace a Ferroli boiler?
Especially if your Ferroli boiler is old, it may be worth considering a replacement boiler. Spare Ferroli parts tend to be very expensive, and the boilers themselves are unreliable and prone to multiple faults, so even if you fix whatever’s wrong now, you may find the boiler breaking down again in a couple of month’s time.
What to do if your Ferroli boiler timer breaks?
The Fix: The cheap mechanical timers that were often installed in Ferroli boilers tend to be very flimsy and often break if someone tries to turn the timer back. It should be fairly simple to replace the programmer.