What should water temp be in gecko spa?
What should water temp be in gecko spa?
The temperature inside the spa skirt is high when the display reads SP-OT. The overall water temperature is over 112 degrees when SP-OH is on the display. Always take care when working with electrical devices near water to avoid injury from electrical shock.
How to troubleshoot an in.xe by Gecko?
* TURN POWER OFF BEFORE SERVICING OR MODIFYING ANY CABLE CONNECTIONS IN THIS UNIT. * TO PREVENT ELECTRIC SHOCK HAZARD AND/OR WATER DAMAGE TO THIS CONTROL, ALL UNUSED BUSHING CONDUITS MUST BE PLUGGED WITH THE ATTACHED NIPPLE. * THIS CONTROLLER MUST NOT BE INSTALLED IN PROXIMITY OF HIGHLY FLAMMABLE MATERIALS.
When to replace a gecko spa pack control?
You may need to replace the pack if the display continues to show the wrong water temperature. Measure the voltage of the first wire line and the grounding nut of the terminal block.
What do you need to know about the gecko y pack?
* THIS PACK CONTAINS NO USER SERVICEABLE PARTS. CONTACT AN AUTHORIZED SERVICE CENTER FOR SERVICE. * ALL CONNECTIONS MUST BE MADE BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE AND ANY STATE, PROVINCIAL OR LOCAL ELECTRICAL CODE IN EFFECT AT THE TIME OF THE INSTALLATION.
The temperature inside the spa skirt is high when the display reads SP-OT. The overall water temperature is over 112 degrees when SP-OH is on the display. Always take care when working with electrical devices near water to avoid injury from electrical shock.
What does 230 volts mean on gecko spa pack control?
A reading of 230 volts means it is getting enough power. Check to see if all the wires are connected to the keypad. Remove the transformer, which is a small silver rectangle with blue, yellow, white, black and red wires coming out that leads to a plastic orange connector.
When to turn on the heat pump on a gecko?
The heating element is kept off and the heat pump is not used to cool the water should its temperature rise above the current set point. This mode uses the heat pump as the main heating source. The heating element is turned on only if there is a large temperature difference between the water and the set point.
How does smart winter mode work on a gecko?
When Warm Weather is “OFF” the filtration over-temperature is disabled and your spa filtering will continue even if the water temperature is high. “Display” and “Hide” buttons allows you to modify message display. If “Hide” option is selected, Smart Winter Mode message will only appear when a SWM purge is in action.