What temperature should my Ferroli boiler be set at?
What temperature should my Ferroli boiler be set at?
Heating temperature adjustment of 30°C to a max. of 80°C; in any case, it is advisable not to operate the boiler below 45°C.
What does D1 mean on a Ferroli boiler?
DELAY
D1 code showing + This is not a fault code! It means DELAY. This indicates that someone has used the hot water.
How to turn on summer mode on domicondens F-Ferroli?
Press the summer/winterbutton (detail 6 – fig. 1) for 2 seconds. The display activates the Summer symbol (detail 10 – fig. 1): the boiler will only deliver domestic hot water. The antifreeze system remains activated. To deactivate the Summer mode, press the summer/winterbutton (detail 6 – fig. 1) again for 2 seconds. Heating temperature setting
Is there overheat thermostat on Ferroli domicondens he 26C boiler?
There is an overheat thermostat on the flue, you could try linking it out and see if it will temporarily fire while it is linked out. If it does then it will need replacing as it is supposed to trip at about 180 degrees. Linked stat out and no difference. It’s going through sequence but not trying to ignite, then goes into fault Yes.
What is the fault code for a Ferroli boiler?
(DOMIcondens HE 26 C, OPTIMAX HE PLUS 31C, OPTIMAX HE PLUS 38C). Fan problem – tachometer signal interrupted fan connection or damaged debris in fan.
What causes a Ferroli boiler to lose pressure?
If your Ferroli boiler is losing pressure, but you’ve checked there are no leaks coming from the radiators and no water discharging from the pressure relief valve, it’s usually a problem with the expansion vessel which will need to be repressurised.
Press the summer/winterbutton (detail 6 – fig. 1) for 2 seconds. The display activates the Summer symbol (detail 10 – fig. 1): the boiler will only deliver domestic hot water. The antifreeze system remains activated. To deactivate the Summer mode, press the summer/winterbutton (detail 6 – fig. 1) again for 2 seconds. Heating temperature setting
(DOMIcondens HE 26 C, OPTIMAX HE PLUS 31C, OPTIMAX HE PLUS 38C). Fan problem – tachometer signal interrupted fan connection or damaged debris in fan.
There is an overheat thermostat on the flue, you could try linking it out and see if it will temporarily fire while it is linked out. If it does then it will need replacing as it is supposed to trip at about 180 degrees. Linked stat out and no difference. It’s going through sequence but not trying to ignite, then goes into fault Yes.
What do you need to know about domicondens FIS?
DOMIcondens Fis a high-efficiency sealed chambercondensingheat generator for heating and hot water production running on natural gas or LPG, and equipped with a microprocessor control system. 2.2 Control panel fig. 1 – Control panel Key 1 =Domestic hot water temperature setting 3 =Heating system temperature setting 5 =Display