What to do if there are no brake lights?

Cut repair costs, not quality. Here is some info for you. Fuse No.1 is for your brake lights and your hazard lights. If no lights after fuse, if found blown, is replaced check your light globes. If nothing works check that the fuse hasn’t blown again. Fuse 16 is for the turn lights.

Why are the brake lights not working but the tail lights are?

Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location). Push the bulbs and turn them counterclockwise to remove from the socket.

What to do if your turn signal doesn’t work?

GO to E3. Check circuit between fuse and flasher connector, flasher and hazard flasher switch and between hazard flasher switch and bulb feed. REPAIR circuit wiring as required. CHECK hazard flasher switch, or turn signal switch, or turn signal switch assembly. SERVICE or REPLACE as required.

What is fuse No.1 for brake lights?

Here is some info for you. Fuse No.1 is for your brake lights and your hazard lights. If no lights after fuse, if found blown, is replaced check your light globes. If nothing works check that the fuse hasn’t blown again. Fuse 16 is for the turn lights.

Why do my hazard lights work, but not my turn signals?

Turn signals only work when the ignition is on; hazard lights work whether the ignition is on or not. The two systems have separate power supplies, so they have separate fuses. You may have a blown fuse. Different vehicles use different circuits, and it is not possible to accurately diagnose the fault with the small amount of information provided.

What are the symptoms of a bad turn signal Flasher?

1. Turn signals or hazards do not function. The most common symptom of a bad or failing turn signal / hazard flasher is hazards or turn signal lights that do not function. If the flasher breaks or has any internal issues it can cause the lights to malfunction, or not respond at all when the turn signal lever or hazard light button are pressed.

Where do the brake lights and turn signals go?

I could be wrong but I do believe the turn signals and brake lights all run through the multifunction lever. AKA the turn signal lever….. So you’re thinking that could be bad? I have had to replace them on chevrolets and one of our Macks. We couldn’t keep things simple we had to run brake lights and hazards through the turn signal lever.