What to do if your Klipsch remote control stops working?

Extract ` system ` folder onto blank USB. Unplug power to Bar 40. Plug in USB. Plug in power. Cycle Source until Source LED is blank. Wait until all LED turns off and starts to blink. Unplug power to Bar and remove USB. Plug power back. Multiple problems arise: 1. Klipsch remote control stopped working.

Why is my bar 40 not playing sound?

Bluetooth used to play media from the phones I connected to but the speaker does not play sound anymore. The source blue LED will be solid (meaning connected) but no sound comes through even when the volume is maxed on both device and speaker. 3. Optical still does not work. Still not audio coming from TV after firmware update.

Why does my sound bar not work with my TV?

Make sure that Control for HDMI or BRAVIA Sync of your TV and audio device is set to ON. Make sure that the ARC feature of your audio device is set to ON or AUTO. Verify that sound is output from the TV after turning on the TV and then the audio device. Make sure that your audio device is set to TV input.

How do I Reset my sound bar back to factory?

Plug only the power source back in and turn the bar on With the LED solid RED, press and hold the [Mute] and [Volume Down] buttons at the same time until the light flashes red several times The sound bar has now been reset back to factory defaults

Why is my Klipsch sound bar not working?

This specifically has to do with a protection circuit that may inadvertently activate and shut the AC power supply off, thus preventing it from sending power to the bar. There is nothing wrong with the bar or the AC power supply – the AC power supply just needs to be reset.

Why is my sound bar not connecting to my TV?

This happens when Control for HDMI function of the soundbar is off. Enable the Control for HDMI function to resolve the issue. On the remote control, press and hold the VOICE button for five seconds. Make sure that the USB indicator on the soundbar flashes twice. If the USB indicator flashes only once, the Control for HDMI function is set to off.

What to do if your sound bar is not working?

There are designated buttons on the soundbar remote that will assist you in quickly and easily making these adjustments. Increase the volume on the soundbar. Check if the Night Mode is set to ON . Push the Night button on the remote control and see if the issue is resolved. Get Support Content on the Go!