What to do if your water heater flashes 7 times?

you will get a 7 flash error. shut off the pilot and reconnect the 3 wire plug and but the cover back on. light the pilot and you still get the 7 flashes; however the water heater kicks back on and gets back up to temperature and shuts off as normal and you will see that your light now only flashes 1 time every 3 or 4 seconds. worked for me…

What does a flashing red light on a water heater mean?

What does a flashing red light on a water heater mean? A solid red status light means the water heater is shutting down. Turn the gas control valve OFF and wait 10 minutes before attempting to relight the pilot.

What should I do if my propane water heater is going strong?

Open the water boiler compartment door to see if the pilot light is blueish-green and going strong within the burner. If there is no light or an extremely weak one, turn off the gas and wait 30 minutes to allow the gas to fully dissipate and not cause an explosion.

How to turn on the blinking light on your water heater?

The basic method is: 1 Turn the knob to “Pilot Light” 2 Push in the knob and hold it in 3 Push the “Pilot Light” button next to the knob 4 Release the Knob

What should I do if my water heater status light is not flashing?

Look at the Status Light on the gas control valve. If the Status Light is flashing more than once every three seconds or not flashing at all, select the appropriate code below. If the Status Light is flashing once every three seconds, the pilot light is lit and the gas control valve is working properly.

What to do when your water heater wont heat up?

If the Status Light is flashing once every three seconds, the pilot light is lit and the gas control valve is working properly. Make sure the gas control valve is turned to “Hot” and wait for the water heater to heat back up. It may take several hours for the water to heat up.

Why does my water heater flame keep going out?

The flame will go out if the tube is clogged with dirt or debris. Sometimes, the tube might be partially clogged and supplying very little gas for combustion- No wonder your pilot light keeps going out. The Solution: Thorough cleaning should do the trick.

What are the common problems with water heaters?

13 Common Water Heater Problems (Tricks to Fix) 1 1. No hot water. If you have no hot water, there are several possible reasons, and you need to work through each of them methodically to eliminate 2 2. Not enough hot water or water not hot enough. 3 3. Water too hot. 4 4. Water takes too long to heat. 5 5. Low water pressure. More items