What would cause my GE washer not to spin?

What would cause my GE washer not to spin?

A loss of electrical power to the washer will cause a failure to spin. To check for power at the outlet, carefully plug a small table lamp or hair dryer into the wall outlet and turn it on. If it does not work, you may have blown a fuse, tripped a circuit breaker or have a defective wall outlet.

How do you reset the spin cycle on a GE washer?

Unplug the washer for one minute, then plug the washer back into the electrical outlet and lift and lower the lid six times within 12 seconds. This will reset the motor and you should be able to start the cycle.

How do you reset a GE Profile washing machine?

Motor Reset Procedure:

1. Unplug the washer for 1 minute from the electrical outlet.
2. Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.
3. The motor has now been reset and is ready for you to start a cycle.

How long should a spin cycle last on a GE washer?

A washing machine’s spin cycle routinely lasts for up to three minutes.

Why does my ge washing machine not spin?

Clean the filter of any debris and then replace it, reassembling the washer. A clogged household drain can also cause water to stand in the washer and prevent the spin cycle from starting. Contact a plumber to address the issue.

What kind of Spin Cycle does GE Profile washer have?

GE’s Profile Series of washing machines come equipped with a variety of specialty cycles that make washing uncommon items, such as fleece or pet bedding, easier. But no matter what type of laundry you’re washing, the spin cycle is one of the machine’s most important.

Is there a problem with the spin cycle on my washer?

Occasionally, you may notice issues with your washer’s spin cycle that can impede its performance. You can resolve some of these problems yourself, but others may require a trained service technician to get your washer back in working order.

How does a ge top load washer work?

Twist the leveling feet clockwise until they reach the ground. Twist and turn the locking nuts counter-clockwise to lock the leveling feet in place. For more information, view the following video: If playback doesn’t begin shortly, try restarting your device.

How to troubleshoot a GE Profile washer Spin Cycle?

Make sure the drain hose is properly connected and that there are no kinks or pinched areas. Your washer may not drain and enter the spin cycle if the pump filter is clogged. Use a flathead screwdriver to open the pump access door at the bottom of the washer’s front.

Why does my ge top load washer not drain?

If you have a top-load washer, a faulty lid switch could be stopping your machine from advancing to the drain or spin cycle. Located under the lid of the washer, the lid switch detects whether the lid is closed. If the lid switch fails, your washer won’t drain.

Why does my ge washer stop the cycle?

However, if you notice your washer occasionally pauses during the cycle, it isn’t necessarily cause for concern. In some cases, when there is excess water and suds, the machine may need to stop the cycle momentarily to get rid of the soapy water more efficiently. Leave the washer alone and the cycle will eventually restart on its own.

What to do if your washing machine does not spin?

If problems persist, disconnect power to the washer for 1 minute, reconnect and retry by either re-starting your previous wash cycle settings and press Start or select Drain & Spin and press Start. If the machine pumps water out and you are positive that the motor is running, but the tub is not spinning, service would be required.