Where is a microwave fuse located?
Where is a microwave fuse located?
Fuses are located in many places inside the microwave, including the top, side, and behind the vent grille. Using the wiring diagram can help you locate the appropriate fuse. Once you have located the fuse, remove any necessary wires and fasteners to free it from the microwave.
Why does my Maytag microwave not start up?
If a message about the door appears in the display, the door has been closed for 5 minutes or more without the microwave oven being started. This occurs to avoid unintended starting of the microwave oven. Open and close the door, then start the cycle.
What do you need to know about microwave door switches?
A door switch is a simple on/off mechanism that prohibits the microwave from operating when the door is open. Microwave door switches are only an inch long. Most are black in color and all have metal prongs, called terminals, extending out from the body of the switch.
How to troubleshoot a Maytag mmv4205bab microwave?
Maytag MMV4205BAB, MMV5207BAS microwave troubleshooting 1 Make sure the door is closed securely. 2 Check to see if packing material or other material is stuck to the door seal. 3 Check for door damage. 4 Press STOP/CLEAR pad twice and re-enter all cooking instructions
How big is the interlock switch on a microwave?
NOTE: Before you begin to test a door interlock switch, first make sure your microwave oven is unplugged, and that your capacitor is discharged. A door switch is a simple on/off mechanism that prohibits the microwave from operating when the door is open. Microwave door switches are only an inch long.
If a message about the door appears in the display, the door has been closed for 5 minutes or more without the microwave oven being started. This occurs to avoid unintended starting of the microwave oven. Open and close the door, then start the cycle.
Where are the switches on a microwave door?
WARNING: Disconnect the microwave from any power source before moving forward. Microwaves include three switches located behind the control panel. A primary, secondary, and monitor switch all actuate to keep the microwave from cooking your kitchen while the door is open.
Maytag MMV4205BAB, MMV5207BAS microwave troubleshooting 1 Make sure the door is closed securely. 2 Check to see if packing material or other material is stuck to the door seal. 3 Check for door damage. 4 Press STOP/CLEAR pad twice and re-enter all cooking instructions
What do you do if your microwave door is open?
A primary, secondary, and monitor switch all actuate to keep the microwave from cooking your kitchen while the door is open. Remove two Philips screws that hold the grill in place on top of the microwave. Remove the grill and lay aside. Locate and remove the one Philips screw that holds the control panel in place.