Where is the heating element on a Atwood water heater?
Where is the heating element on a Atwood water heater?
On your model Atwood Water Heater GC6AA-10E the electric heating element is located in the water tank in the back side of the water heater. Atwood does recommend having a RV repair shop replace the heating element because of it’s location.
What size nut is on a hot water heater element?
The right socket for water heater element is Drive x 1-1/2 inches socket. Designed to properly the all common size electric heater elements, this socket’s opening will snugly fit the hex end.
What is an element wrench?
The Camco 09883 Element Wrench is a convenient and handy tool for repairs and home improvement projects. It is plated with zinc for extra strength, and can fit all screw-in elements and 1.5″ nuts. It can go where other wrenches cannot go.
Where is the heating element on a camper?
Some campers also have a switch inside the camper to make it more convenient to turn on the electric heating element. This inside switch could be located anywhere. It is often in the kitchen, though sometimes in the bathroom, or often on the monitor panel itself.
What’s the best way to replace an Atwood water heater?
Make sure you are doing a 12-24 hour soak with 1/2 vinegar and water with the unit energized and then flush out well. This will prolong the years of use from your HW heater. Just my 2 cents This element was to replace one in an Atwood water heater.
Where is the element on a hot water heater?
The element is located on the lower rear portion of the hot water heater. If you unlucky and can’t get to the rear without complete removal, I totally feel sorry for you as there are a lot of hoses you can’t see. Youtube has video’s of how to remove this hot water heater , if there is no access like mine had.
How big is an Attwood 92249 water heater AMPCO?
So, there is a thread pattern difference. Although, i see the part is a attwood 92249 but it did screw in. Plus, the element is at least 12 inches long and the AMPCO is only 6.5 long….so i do not know the soloution….i contacted attwood and they gave me the same replacement # .. Good for its use!
Where is the heating element on an Atwood water heater?
The heating element on your Atwood model GC10A-4E water heater (our part # AT94022) should be on the backside of the unit, towards the bottom of the tank. It will actually be behind the gas line assembly, which will need to be loosened and moved out of the way to gain access to the existing element so it can be removed or replaced.
Where to replace an element on a water heater?
It will actually be behind the gas line assembly, which will need to be loosened and moved out of the way to gain access to the existing element so it can be removed or replaced. I have attached an image to assist. If you need a replacement heating element you can use the Camco # CAM02143.
When did the Atwood water heater service manual come out?
INTRODUCTION The 2004 edition of the Atwood Water Heater Service Manual is a resource created to help service technicians identify Atwood product by serial number, diagnose service problems and efficiently and effectively process warranty claims.
So, there is a thread pattern difference. Although, i see the part is a attwood 92249 but it did screw in. Plus, the element is at least 12 inches long and the AMPCO is only 6.5 long….so i do not know the soloution….i contacted attwood and they gave me the same replacement # .. Good for its use!