Why are my trailer tail lights not working?

Expert Reply: It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side trailer connector using a circuit tester such as # 40376.

Why are my brake lights not working but my tail lights are?

Damaged or disrupted wiring can cause tail lights not to work, but brake lights are. The two lightings use different wiring as each bulb has got its power supply. A recent accident at the tail end of your car can increase the likelihood of this problem.

What should I do if my tail light is not working?

Preferred Procedure: Replace bulbs with manufacturer replacement bulbs. Tail light bulbs are replaced with incorrect bulb causing improper operation. If tail lights stay on continuously, the headlight/tail light switch or BCM has failed.

Is it dangerous to drive with broken tail lights?

So, driving with broken tail lights is very dangerous. Actually, people find out about their tail light problem when the police officer pulls them over. This is because the tail light malfunction is not that easy to spot. Usually, brake lights are the problem and the tail lights work just fine. But, sometimes it’s the opposite.

Can a rear light be used as a running light?

If your bike’s rear lighting is stock, then you won’t have running lights. The rear turn bulbs are single element, while the fronts are dual element, giving the fronts only ‘running’ light function. Loosing my lone tail light is exactly why I added a kit that turns my two turn signals into tail lights and retains the turn signal function.

Why are my running lights not working?

If the running lights are not working, one of the first things to check is the presence of a blown fuse. If all of the lights are connected on the same circuit and one of the fuses is blown, then the lights will not work.

Why would the tail lights not work?

Sometimes, pressing the brakes turns off the tail lights too and they don’t start working again until you let the brakes off. The possible reasons for brake lights not working but tail lights are: Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are.

Why is my trailer running lights not working?

Because the most common reason for trailer lights not working properly is a bad or missing ground, check the trailer’s and truck’s ground connection first. A poor ground often becomes the culprit when only some lighting functions are working and when lights go out when you push the brake pedal.

Why are both my tail lights not working?

Possibly the most common reasons why tail lights are not working is because of the burned bulb. As we all know, every car’s light is manufactured and made out of the light bulbs. These lights are very similar to the house light bulbs and they also can burn or malfunction. Nov 17 2019