Why did my ice maker stop working after I changed the filter?

While a clogged water filter could be the cause of your ice maker not working, there are more common causes. First, make sure that your icemaker is simply turned on and plugged in. Check the power cord and make sure it is plugged in. Check the water supply to make sure it is going from the fridge to your freezer.

Why is my ice maker not dispensing ice?

Ice Clumps in the Bin One of the most common – and innocent – causes of an ice maker that won’t dispense ice is that an ice clump has formed inside. In order to drop the ice cubes from the mold, heat is released to lightly melt them. Sometimes you may need to remove the entire bin or even defrost the ice maker.

How do I reset my ice maker after changing the filter?

Unplug the refrigerator for 30 seconds; then plug it back in. Within 15 seconds of restoring power, press the feeler arm three times in succession. This should force the ice maker to run water into the reservoir and begin the cycle of ice production.

How do you know if your water filter is clogged?

How to Tell if Your Water Filter Is Working

A slow decrease in water pressure.
Checked the outside of the filter.
Drains or faucets start to make odd noises.
Turbidity or bad tasting water.

Can you unclog a water filter?

Dish soap or water and vinegar mixture work, or you can buy solvents specifically for cleaning water filters. Let the filter soak for 10 – 30 minutes, depending on how soiled it is. Then rinse under a gentle stream of water until the water coming out of it is clear.

Why is my ice maker not working after replacing the filter?

After replacing the water filter, no ice! Here’s what I’ve tried so far: 1) Checked to make sure the ice maker is indeed “on.” 2) Water pressure: it’s good. 3) Hit the reset button. It chimed, made 7 tiny ice cubes, and then stopped. 4) Turned off the power for 5 minutes. After, I tried the reset button. Now it will NOT chime.

What to do if your refrigerator does not make ice?

1. Turn off the water to the refrigerator if needed. 2. Remove the water filter and other pieces of plastic. 3. Check the water filter and filter housing for anything that may prevent it from connecting. 4. Replace the water filter by pushing in and twisting it until it locks into place. 5. Turn the water back on if you turned it off. 6.

Why is the ice maker on my LG refrigerator not working?

The water filter on newer refrigerators need to be “Twist Locked”into place. If the water filter is not installed correctly the water will not flow and therefore no ice or water will come from the dispenser. This is a very common issue with newer refrigerators. Many times when the water filter is changed, the ice maker stops working.

Why is my side by side ice maker not working?

The water inlet valve which supplies water to the ice maker is designed to work with a minimum of 20 psi of water pressure. If the refrigerator ice maker is not working, the door switch might be defective.

How do I change the filter on my ice maker?

Usually, changing it out is as simple as opening the cover, twisting and pulling the old filter out, and then twisting the new filter in. Be sure to look up the water filter changing instructions specific to your fridge to be sure. If your ice maker has a switch other than the control arm, find it and toggle it.

How to get your ice maker to start making ice again?

If your ice maker has a switch other than the control arm, find it and toggle it. This is a simple matter of resetting the power to your ice maker. By flipping the switch off and back on, you may be able to reset the functionality so that your ice maker begins to dispense ice again.

How does an ice maker turn off the bin?

Next, take a look at the control arm. The control arm is a metal bar that sits above the ice bin. When the ice bin is full, the control bar is pushed upward, which turns off the ice maker until there’s room for more ice. In effect, the control arm functions as an off-switch.