Why did my pool turn brown when I shocked it?
Why did my pool turn brown when I shocked it?
Brown water is always caused by oxidized iron. When you shock your pool, and there is iron in it, the iron is oxidized with the water, thus turning your pool brown or rusty color. Tannin from leaves is also another agent that can make your pool water turn brown.
How long does it take for pool water to clear up after shocking?
Always run the pump when shocking the pool and allow it to circulate for 24 hours. The water should then be a blue or cloudy blue color. Test the water 24 hours after shocking and start adjusting pH and alkalinity levels. The chlorine will still be elevated, but over a few days, it should stabilize.
Why is my pool green after I shocked it?
When shock chlorine oxidizes the copper, it turns green and that’s what you’re seeing in the pool. To get rid of it you’ll need to raise the pool’s calcium hardness by adding calcium chloride. The other culprit can be high levels of pollen.
What does it mean when your pool water is brown?
Brown is usally a sign of high iron. I’d get it tested again. In the meantime – liquid chlorine should be added to get your chlorine level up to shock level – at least 15 ppm and keep it that way by adding more chlorine throughout the day. You need to get your pH and alk down. Use muriatic acid.
Why does my pool water turn cloudy after a shock?
High levels of the wrong chemicals can cause water to turn cloudy or milky after shock. For instance, if your pH level is above 7.6, then you’ve wasted half of the chlorine. That’s why it’s best to use a low pH range (somewhere between 7.2 and 7.4) when shocking your pool.
What to do if your swimming pool steps turn brown?
We put in shock and the balance pak 100 (and all the other products recommended to open our pool) and then our turned pool (green) and steps turned (yellow/brown) adding additional shock only made it worse. The sides were not slimy and the steps could not be cleaned with ANYTHING!
What happens when you put shock in your pool?
If people are complaining that their pool turns brown/green/red/yellow when they put shock in and then you take it to the pool store and they test for metals, many a time the test will result in negative metals because the metals have already had a reaction with the chlorine and won’t register.
Brown is usally a sign of high iron. I’d get it tested again. In the meantime – liquid chlorine should be added to get your chlorine level up to shock level – at least 15 ppm and keep it that way by adding more chlorine throughout the day. You need to get your pH and alk down. Use muriatic acid.
How can I get rid of brown water in my Pool?
This is a DIY solution for getting rid of nasty brown pool water. This is usually caused by filling your pool with well water. The iron in the well water reacts with the chlorine and turns the water brown. The items can be purchased mostly at Walmart for under $30.
If people are complaining that their pool turns brown/green/red/yellow when they put shock in and then you take it to the pool store and they test for metals, many a time the test will result in negative metals because the metals have already had a reaction with the chlorine and won’t register.
Why does my well water turn brown after chlorine?
You had it tested for metals and it came back positive. What can you do about it? Normally, brown water after chlorination means high iron and/or copper content. This is common with well water. You now need to find a good metal sequestrant. Metal sequestrants that are based on HEDP, phosphonic acid and/or its derivatives are the most effective.