Why does my spa get too hot?

A simple cause of hot tub overheating is the hot tub’s temperature may be set too high. This heat transfers into the tub water, increasing the temperature. So, if the hot tub is set to filter too many hours per day, it can cause overheating.

Is it safe to replace the Jets in a spa?

Drain the water from your spa. It is not safe to replace the jets while water is still in the tub. Drain all water out of the tub before working on your jets. To drain your tub, first turn off the spa’s circuit breaker.

What should I do if my spa equipment pack is not working?

Please remember that water and electricity DO NOT MIX. If you are not capable of performing a repair yourself, please contact a local spa professional or a licensed electrician in your area. Also realize that the wiring and equipment described herein represents the “average” spa equipment pack.

Why is the heating element on my spa not working?

If for any reason one of these components fail then the required voltage to the coil will be jeopardized and the contactor will not close in order to send power to the heating element. As mentioned above, it is usually one of these components that will cause a spa not to heat.

How do I get water out of my spa Jets?

Drain all water out of the tub before working on your jets. To drain your tub, first turn off the spa’s circuit breaker. Then, remove the front panel of your tub and find the hose spigot. Attach a garden hose to the spigot and drain the water out of the tub.

Where can I buy Maax SPAs SPA covers?

Hot Tub Outpost has a wide variety of MAAX Spas parts for almost every tub model, as well as parts for Hot Springs tubs, Bullfrog Spas tubs, Master Spas, and more! Where Can I Buy MAAX Spas Spa Covers?

Are there any recalls on Maax hot tubs?

Maax Spas has received six reports of generators in the affected hot tubs and swim spas igniting and causing damage to the generators and surrounding hot tub or swim spa components. There have been no reports of injuries. Independent hot tub and swim spa retailers nationwide, from January 2012 through July 2015.

How many seats are in a Maax hot tub?

471 – The Maax Spas 471 hot tub is a simple design with one lounge and five other seats all giving you a different seating level in the water. 470 – The Maax spas 470 hot tub is a classic seater tub offering seven seats and a great footwell.

What to do if your Maax spa overheats?

Make sure that the slice valves are open and reprogram the spa to make sure there are no overlapping time cycles. Open all jets. Contact the dealer or service organization if the problem continues. Overheating condition where a water temperature sensor has detected water temperatures of 110°F (43.3°C). Spa functioning is then disabled.