Why does my toilet keep clogging and how to fix it?

If you have a slow flushing toilet, partially clogged toilet trap or drainpipe, clogged sewer lines or even a blocked vent stuck, your toilet will most likely every time you flush it. Depending on what is clogging your toilet, your approach to fixing it will be different.

What to do if you have a plugged toilet?

It was even worse when we moved into a new house with some water-saving toilets with a small opening at the bottom of the bowl. “As for clearing plugged toilets, there are a couple things that can be done. Get a large bucket (like a 5 gallon bucket) and fill it full with the hottest water you can get from the bath tub and pour it down the toilet.

How do you fix a clogged toilet vent?

To fix this issue, climb to the top of the roof using a ladder, with garden hose in hand. Have someone turn the water on and pour the water down the vent stack. The water will unclog the vent and wash down anything that could be clogging it. A clogged vent stack can also cause a weak flushing toilet.

Why does my toilet not flush when I Flush my Toilet?

A foreign object is in the toilet. Maybe a toothbrush or something that cannot be flushed is clogging the toilet line. Clog in the vent pipe, the plumber should had checked for this but a vent pipe that is clogged will effect plumbing and flush capability.

Is it possible to unclog a toilet without using a plunger?

Usually, you will have to use a plunger to unclog the toilet. However, some toilets don’t go back to normal with a simple remedy. After several flushes, a temporarily fixed toilet will become clogged again. So can you just let it unclog itself without you doing anything?

What to do if your toilet won’t drain?

If you have already attempted these four ways to unclog a toilet that won’t drain, the experts at Mr. Rooter ® are ready to help you uncover your plumbing problem. If you are currently experiencing any emergency plumbing issues, contact your local Mr. Rooter for immediate service. Having to plunge a toilet all the time can be a real hassle.

What to do if you have a blockage in your toilet?

If you believe a blockage sits in your toilet’s trap, try plunging the toilet to move the clog along. Use a flanged toilet plunger to force water through the trap and move the clog. If plunging does not work, a toilet auger is another option to clear the clog.

Why is the jet flush hole in my toilet so weak?

Over time, calcium and other deposits can develop and block the jet flush hole, weakening your toilet flushing power. Solution Use an acidic toilet cleaner like Zep ( view on Amazon ) and a brush to clear the jet flush hole of any build-up.

Why is water not entering the toilet bowl?

If these holes become clogged with lime or other debris, the water will not enter the bowl with the same amount of force. Use a small mirror to view the underside of the toilet bowl rim. Inspect the holes around the rim for signs of clogging.

What causes water to flow smoothly down the toilet?

Your toilet is clogged. Again, one of the requirements of a normally functioning toilet is a clear drain system. The absence of a blockage will create an effective flush and thus make the toilet water flow smoothly and rapidly down the toilet.

Is it OK to plug a toilet with a pressure plug?

Doing so will only damage your drain! A pressure plug is a temporary solution. If you plan on keeping the toilet sealed for more than a few hours, you may need additional bracing. Pressure can build up in the drain. Over time, the plug can loosen and shoot off the toilet’s floor drain.

Why is the Flapper on my toilet not opening?

Flapper not opening completely. The flapper is the part of your toilet that lets water flow from the tank on the back down into the toilet bowl, creating the flush. If the flapper doesn’t open all the way it won’t release enough water, which means you’ll get a weak flush. Clogs are common in toilets with a weak flush.

What makes a toilet not flush at full power?

Do not flush heavy paper items such as paper towels, sanitary products or non-flushable wipes. Keep the water jets around the edge of the toilet rim clean. If the jets become stopped up over time, the toilet will fail to flush at full power and make it more likely that obstructions will accumulate.

Why is my pocket comb clogging my toilet?

More than one toilet has become clogged when a pocket comb became lodged in the internal trap. A few minutes with a plunger should loosen any blockage and remove the clog. More stubborn clogs can be cleared with a toilet auger.

Why does my toilet fill up with water when I flush?

When you flush, the water in the bowl will have nowhere to go, and the toilet will fill up as water from the tank flows into the bowl. If the waste pipe isn’t clogged, but you notice a weak flush and slow drain, you might have a partial clog.

How long does it take to flush a clogged toilet?

The water level remains high, then usually drains down to normal height within a minute or two. You might not even know the toilet is clogged until you flush it. So if you suspect a problem, test the drainage first, then reach for the toilet plunger.

Why does the Flapper on my toilet not seal?

If the chain has too much play in it, it can hang up and the flapper will not seal and the toilet will constantly run water. Flush the toilet to be sure the flapper works and positions properly. Make sure the water exits the tank with no problems. If the water drains very slow then the air pipe or the sewer pipe may be clogged.

How do you unclog a clogged toilet?

Heat up a gallon of hot water on the stove and pour some dish soap into your toilet while the water is heating up. When the water is extremely hot, but not boiling, pour into the toilet carefully. Wait for 10-15 minutes while the dish soap and hot water soften the clog. Once you do so, the toilet will unclog and flush freely.

What is the best thing for a clogged toilet?

Start with dish soap. As soon as the toilet clogs, head to the kitchen and fetch some dish soap; the slippery soap should help lubricate the clogged pipe and allow the lodged debris to slide down more easily. Pour about a half-cup into the toilet.

How can I fix a clogged toilet?

Baking soda and vinegar can also great when you need to know how to fix a clogged toilet without a plunger. Simply add one cup of baking soda to the clogged toilet. Wait a couple minutes. Next, slowly pour two cups of vinegar into the toilet.

What should I do if my toilet is clogged?

Method 1 of 7: Plunging the Toilet Keep the toilet from overflowing. If your toilet doesn’t flush properly after one flush, don’t flush again. Prepare the bathroom. In case splashing occurs, place newspapers or paper towels on the floor to soak up liquid. See if you can clear the obstruction. Use a high quality plunger. Insert the plunger into the bowl.