Why does my washer spin sometimes?

A broken drive belt, or one that has slipped off the pulley wheel, can cause the washer to agitate during the wash cycle and yet—despite the noise of the motor running—the drum remain still during the spin cycle. If not, you may need to replace the drive belt.

Why is my Kenmore washing machine not working?

If the machine thinks the water level is low or is not filled correctly, the sensing function will help the machine stabilize the amount of water required for use. To put it simply, your Kenmore washer uses the sensing function to determine how large the load of laundry is, and just how much water will be needed to clean the clothes properly.

What does a sensing spin on a washing machine do?

The washing machine will then use a few slow, short spins to determine how big the load of laundry is. These are what are known as “sensing spins”. It then takes between two and three minutes for the washer to begin adding water to the load. The unit then moves the load quickly, and pauses to allow water to soak into the clothes.

What does shift actuator do on Kenmore washer?

Many top-load Kenmore washing machines using motor shift actuator to switching transmission rings between WASH and SPIN cycles. At the very beginning of the WASH cycle, the control board checking position of the tub and to make sure shift actuator not been set to the SPIN cycle.

What does the sensing function on a Kenmore washer do?

To put it simply, your Kenmore washer uses the sensing function to determine how large the load of laundry is, and just how much water will be needed to clean the clothes properly. While you may notice that the wash load is not entirely submerged in water sometimes, this is normal and required for the clothes to move around as needed.

Why is my Kenmore washer not spinning?

There are three possible reasons your washer isn’t spinning. The belt is broken, loose, or frayed. The belt transfers the power from the motor to the drum. If the belt can’t spin and turn the drum, the washer won’t spin. The motor.

What causes the washing machine to not spin?

How to Repair a Washing Machine That is Not Spinning Fast Enough Check to see if the washer is overloaded. Modern washing machines have automatic shut-off devices for out-of-balance loads. Make sure the water is draining properly. If the water does not drain out, then it could cause the washing machine not to spin. Check to see if any belts have came off or are loose.

Why will my washer not agitate or spin?

The washer will not agitate or spin with the lid up, though many models will still fill and drain and the timer will advance. Most models have either a lid switch probe or a magnet on the lid that activates the lid switch when the lid is closed. If missing or damaged, the washer will not agitate or spin, even with the lid closed.

Why does GE washing machine not spin?

One of the most common reasons why your washing machine has stopped spinning is when it can’t drain properly due to a blocked drain pump. This can happen when something gets stuck in the outlet pipe, preventing the steady flow of water in and out of the machine.