Why does my washing machine say FL?

The Whirlpool washer Lo FL error code is displayed when water is not detected entering the washer or it’s not filling the washer fast enough. Make sure the water supply hoses are not kinked or pinched and that screens in the supply line are clear of debris.

What does Fl mean on Kenmore washer?

overfill condition
Answered in 6 minutes. “FL” flashes if any overfill condition occurs. This condition occurs when excessive water in. the tub causes the overfill switch to trip. The control must realize that the trip was due to an.

Why is my washer saying HF?

Common solutions for: Whirlpool F/H – FH No Water Entering Machine or Pressure Switch Failure. Check fill hoses to washer for kinks or clogged screens at water inlet valve. The manufacturer has assigned this error or fault code to indicate that there is a problem with the amount of water entering the machine.

How do you fix your washer when it says LF?

LF in the display Check the water inlet hoses to be sure they are not clogged or kinked. You may also need to check the screens on the washer water inlet valve. This means shutting off the water supply, and disconnecting the water inlet hoses from the washer.

What does Fl mean on my Maytag washing machine?

The “FL” is indicating that the door has failed to lock or it locked but the control does not sense the door has locked. It could be caused by: faulty door lock solenoid. For instance, the DO code indicates the door is open or the door lock has failed to engage.

What does SL mean on washer?

Suds Lock
The SL means Suds Lock. The motor controller senses a suds lock condition by analyzing the current draw on the drive motor. If a potential suds lock is detected, the control tries up to 3 times to clean out the unit with a mini-cycle. SL is displayed if suds are detected but the unit is unable to clean out suds.

What does F5 mean on my Kenmore washer?

The F5 error code indicates that the Central Control Unit (main machine control board) detects a temperature sensor resistance that is out of the normal range. The F5 error is normally caused by a failed NTC temperature sensor.

What does a flow meter do in a washing machine?

The flow meter measures the amount of water going into the dispenser and relays that information to the control board.

What does ND mean on a washer?

No Drain Condition
No Drain Condition (Nd) If your washer is beeping, and the display is flashing “Nd”, your machine is showing a no drain condition which is usually related to a backed up drain hose or a clogged debris filter.

When does a whirlpool Calypso washer lose power?

Home » Appliance Repair Help » Washing Machine Repair Help » Whirlpool Calypso Washing Machine Help » Whirlpool Calypso Fault Codes PF Power Failure PF flashes if the washer loses power during a running cycle. The washer does not flash PF when it is first plugged in.

What’s the Peekaboo mode on a calypso washer?

The Calypso washer is equipped with a peekaboo mode that allows the washer to continue nutation for 5 seconds after the lid has been opened. After the lid is closed the start button must be pressed to continue the wash cycle. This washer uses a reversible, variable speed (Single Phase Induction Motor) as its main drive motor.

What does PF flash when the washer loses power?

PF Power Failure PF flashes if the washer loses power during a running cycle. The washer does not flash PF when it is first plugged in. Press START to continue the cycle from the moment that power was lost -OR- Press STOP/CANCEL to clear the display and completely cancel the cycle. FL Flood Condition FL flashes if any overfill condition occurs.

When to return to standby mode CA or Cl?

CA Cl Average current limit Or Instantaneous current limit If a status signal comes back from the motor controller that a current limit has been breached, the unit will return to standby mode and display either CA for average current limit trip or Cl for instantaneous current limit trip.