Why does some toilet take so long to fill?
Why does some toilet take so long to fill?
A toilet that takes too long to fill might have any number of issues that cause the problem. Clogged fill lines or malfunctioning floats both affect the flow of water into the toilet. Perform some quick checks and replace any damaged components with readily available parts. Flush the toilet to check water flow.
How long should it take to fill a Kohler toilet tank?
The time to fill the tank varies with the design and size of the tank, which can be from 1.6 to 7+ gallons. The flushing action normally takes about 10 to 15 seconds (or less with the new 1.6 gallon toilets). Refilling the tank generally is in the range of 45 seconds to 1-1/2 minutes.
How to fix a Kohler toilet after a flush?
Corrective Actions: 1 Fully open the water supply shut-off valve. 2 Verify that the flapper or canister are properly seating after the flush. A loose chain or other object may be interfering with the refill. 3 Clean the fill valve inlet or the fill valve seat/seat washer. 4 Verify that the water supply is free of debris.
What do you call a standard Kohler toilet tank?
Use only KOHLER Genuine Parts to avoid property damage and achieve optimal performance. The phrase “Standard Toilets” applies to floor-mounted toilets with standard flush and fill valves and dual flush models. Refer to In-Wall Toilet Tank Troubleshooting if you have an in-wall toilet tank.
Where to find service number on Kohler toilet?
Check if Your Toilet Is a One-Piece or Two-Piece Toilet Look for Model and Parts Numbers If you have a toilet manufactured after 1990, various service part numbers are listed on the underside of the lid. The toilet tank number is imprinted on the inside back of the tank.
Do you use Kohler flush and fill valves?
IMPORTANT! Use only KOHLER Genuine Parts to avoid property damage and achieve optimal performance. The phrase “Standard Toilets” applies to floor-mounted toilets with standard flush and fill valves and dual flush models. Refer to In-Wall Toilet Tank Troubleshooting if you have an in-wall toilet tank.
Corrective Actions: 1 Fully open the water supply shut-off valve. 2 Verify that the flapper or canister are properly seating after the flush. A loose chain or other object may be interfering with the refill. 3 Clean the fill valve inlet or the fill valve seat/seat washer. 4 Verify that the water supply is free of debris.
Is it possible to read the model number on a Kohler toilet?
Model numbers in older toilets may be hard to read due to mineral or bacterial growth within the tank. Rub the area to remove residue. Refer to care and cleaning for vitreous china toilets and bidets on kohler.com/clean. In some KOHLER tanks, an Insuliner® tank liner may be installed, covering the model number.
Use only KOHLER Genuine Parts to avoid property damage and achieve optimal performance. The phrase “Standard Toilets” applies to floor-mounted toilets with standard flush and fill valves and dual flush models. Refer to In-Wall Toilet Tank Troubleshooting if you have an in-wall toilet tank.
IMPORTANT! Use only KOHLER Genuine Parts to avoid property damage and achieve optimal performance. The phrase “Standard Toilets” applies to floor-mounted toilets with standard flush and fill valves and dual flush models. Refer to In-Wall Toilet Tank Troubleshooting if you have an in-wall toilet tank.