Why is my hot tub not running when I turn it on?

When the spa is refilled, some of that air may become trapped and act as a plug that keeps water from moving through the hot tub’s piping. If you turn on your spa, hear the pumps running, but see no water flowing from the jets, the most likely culprit is an airlock. Turn the spa off immediately to prevent damage to the heater and the pumps.

Is there a problem with my caldera hot tub pump?

This doesn’t mean that there’s an issue with the pump; it simply means that you’ll have to rule some things out to get to the root of the actual problem. As always when troubleshooting, have your Owner’s Manual handy. On Caldera Utopia® Series spas, the logo light serves as a helpful and visible diagnostic tool.

Why is my Spa 2 speed pump not working?

II have a 2002 Optima spa. Several months ago the button on the top-side control panel for the 2 speed pump (#1) stopped working. There’s a second, smaller control panel on the opposite side of the tub which also will not work. But when the preset filter cycles occur the pump will come on and the icon comes on on the display.

What to do if your hot tub control panel is dead?

This is why it is important to keep the control panel in good working order. Check out hot tub controls on Amazon. If part of the control panel is dead or the whole panel is frozen, you will want to see if the problem is the circuit board or the control panel.

What to do if your spa pump is not working?

With over 25 years of experience, we’re equipped to help with any spa issues you have or to discuss a new spa. When your spa pump is making noises… This usually happens if you recently drained the spa. Open the lock nut until you hear air hissing, then tighten up again as water begins to leak.

What do you do at the Catalina spa?

An error occurred while retrieving sharing information. Please try again later. At Catalina Spas we believe in an overall approach to health, exercise and relaxation. Relaxing massages and hot water therapy are the best options for the person who has experienced stresses and strains throughout the day or week.

What kind of pump does a hot tub have?

Spas and hot tubs with one pump usually have a 2-speed motor, operating on low speed most of the time, and on high speed when using the tub with the jets. Here’s a simple way to troubleshoot your spa or hot tub pump. Hot Tub Blogs should do this more often – These are our most Frequently Asked Questions about spa pump repair.

When to put your hot tub in Economy mode?

For this reason, it’s best to only run economy mode when you’re not going to be home for 2-3 days or more. Some hot tubs, like Hydropool’s Self-Cleaning hot tubs, even have preset programs that can automatically switch between economy mode and standard mode.

Is it OK to run a hot tub filter?

However, it is completely fine to run hot tub filters for longer periods of time if desired. Just remember that doing so will increase energy bills and is not typically necessary to maintain a hot tub’s hygiene.

Why does my hot tub pump only work on low speed?

A: When your 2-speed hot tub pump only works on low speed, and never kicks into high speed, there are four possible solutions to check. First , if you are pushing an air switch button, check that the air hose is not crimped or disconnected.

Is it normal for a hot tub to run all the time?

So, if your hot tub sounds OK and hasn’t suddenly started running continuously after only running periodically then it is probably fine. In other cases, however, a constantly running hot tub is an indicator of a problem that needs to be addressed and rectified as quickly as possible. What Could Cause A Hot Tub To Constantly Run?

How does economy mode on a hot tub work?

Rather than heating the water consistently to maintain your set temperature, economy mode will only heat the water during your scheduled filtration times. Simply put, economy mode reduces your hot tub energy costs by running your heater less. The downside of economy mode is temperature fluctuation.

What to do when your hot tub is not in use?

Always keep your hot tub covered when not in use to keep debris out and to more efficiently maintain water temperature. Keep detergents and soaps out of your spa by showering with water only before getting into the hot tub.