Why is my Kitchen Aid fridge not making ice?

A clogged or incorrectly installed water filter will reduce the water flow to the ice maker and dispenser, which will result in small ice cubes, low ice production or decreased water flow. If the refrigerator has a water dispenser, check for a problem with the filter by doing the following: Remove the filter.

How do you reset the ice maker on a KitchenAid refrigerator?

Shut the freezer door and allow it to reset for 10 seconds before opening the door. Press the door’s switch three times and shut the door. Let it sit for a few seconds to reset the ice maker.

What do you do when your ice maker stops making ice?

Fix: Start by making sure all electrical connections are properly seated. Slide the refrigerator out from the wall, turn off the water supply valve and disconnect it from power. Locate the quick release plug on the back wall inside the freezer. Unplug the connection it and reconnect it to ensure it’s fully connected.

How do you reset ice dispenser?

Once you have located the on/off switch, do the following:

Remove the ice tray and cover plate (or just the ice tray).
Turn the switch from on to off.
Unplug the ice maker at the mains.
Wait 10 minutes.
Plug the ice maker in again.
Turn the switch from off to on.
Replace the ice tray and the cover plate as necessary.

Will my ice maker work without a filter?

Will refrigerator water dispensers and ice makers work without a water filter? For most refrigerators, the water dispenser and ice maker will work just fine without a water filter, but some do require what’s called a filter bypass to continue working.

What to do if your KitchenAid ice maker is not working?

If your KitchenAid Ice Maker is not working u se this troubleshooting guide to diagnose common problems. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

Where is the model number on a KitchenAid ice maker?

The model number is located on the inside of the ice maker. In the U.S.A., register your ice maker at www.kitchenaid.com. In Canada, register your ice maker at www.kitchenaid.ca.

How to troubleshoot the ice maker product help?

1 Ice maker turned off 2 Ice maker jammed 3 Water filter needs to be replaced 4 Water system needs to be flushed 5 Check water supply line

What should I do if my ice maker is jammed?

First, ensure that ice is not jammed in the ejector arm of the ice maker. Remove jammed ice from the ejector arm using only a plastic utensil so the ice maker is not damaged. This will likely resolve the issue.

The model number is located on the inside of the ice maker. In the U.S.A., register your ice maker at www.kitchenaid.com. In Canada, register your ice maker at www.kitchenaid.ca.

1 Ice maker turned off 2 Ice maker jammed 3 Water filter needs to be replaced 4 Water system needs to be flushed 5 Check water supply line