Why is my KitchenAid dishwasher soap dispenser not opening?

If dishes, utensils, or dishwasher racks are blocking the detergent dispenser door, the dispenser door may not open. This can happen when the dishwasher is not loaded properly. Make sure water action can fully reach the dispenser.

Why is my KitchenAid dishwasher locked?

Kitchenaid dishwashers have a safety lock to prevent children from changing the settings during a wash cycle. You can unlock the door again through a sequence of button presses. If that doesn’t work, resetting the hardware may help.

What buttons do I push to reset my KitchenAid dishwasher?

First push the Hi Temp, Hi Temp Scrub or Hi Temp Wash button and then press the Heated Dry, Energy Saver Dry or Air Dry button, depending on the model you have. After pressing the buttons, you may see the LEDs above the buttons engage, blink or activate.

How do I reset the CONTROL LOCK on my KitchenAid dishwasher?

Press and hold the designated control lock button for your model for 3 seconds. The location of the control lock button may vary depending on your model. Refer to the Owner’s Manual for the control lock button location for your model. The light will turn off and the control will be unlocked.

How do I fix the CONTROL LOCK on my KitchenAid dishwasher?

To turn off Control Lock, press and hold the Options key that says “Control Lock Hold 3 Sec” under it for 3 seconds. If the dishwasher has a dedicated Control Lock button in the Options selections, press and hold CONTROL LOCK for 3 seconds.

What’s the problem with my KitchenAid dishwasher detergent door?

1 Simple Fixes. The most common problem with the detergent doors on KitchenAid dishwashers is that they either don’t open during the cycle or open only halfway. 2 Broken Timer. KitchenAid dishwashers rely on an internal timer to complete the wash cycle properly. 3 Malfunctioning Door Components. …

What is the control button on a KitchenAid dishwasher?

Mostly, though, Kitchenaid dishwashers use a control or delay button. If you’re not sure what button controls the lock, refer to the owner’s manual if you still have it. You could also search your dishwasher’s model number online for more information.

When do I need to Reset my KitchenAid dishwasher?

Another option is to reset the control panel by pushing two buttons in series. Issues that can necessitate a reset of the dishwasher include when a cycle won’t advance, when the Clean-Complete light keeps blinking, when there are power interruptions, or when the dishwasher fails to run altogether.

Where are the wash and dry buttons on a dishwasher?

Locate the wash and dry buttons on the control panel. The control panel is above or on the upper edge of the dishwasher door. The available buttons differ from model to model, so read the labels carefully. Look for a “Hi Temp” scrub or wash button.

What should I do if my dishwasher is not working?

If the Start/Resume light is blinking, press START/RESUME and close the door within 4 seconds. Be sure the door is closed and latched. ■ Check that there is not an interference between large casserole dishes and the wash system at the back of the dishwasher.