Why is my washing machine not starting the rinse cycle?
Why is my washing machine not starting the rinse cycle?
The drain control mechanism allows water to drain out of the washing machine correctly. If the drain control is broken or the drain is clogged, the washing water won’t be able to escape and the washing machine will stall trying to start the rinse cycle.
What to do if your washing machine won’t drain?
Start by unplugging the machine and emptying the water. Bail the water out of the tub, or you can drain the tub using gravity by placing the washer drain hose on the floor near the drain or in a bucket. Clamp the hose to prevent any remaining water from running out.
Why is the water not coming out of my washer?
The pump in your washer may not be able to fully get all the water out as there may be something jammed in the pump. This will cause a restriction and the water will not flow out therefore not rinse properly. Remove the drain pump to see if something is stuck in it. 4. Drain Hose Clogged:
Why does my Maytag washer not spin or drain?
If the washer won’t drain or spin, either something is stuck in the washing machine drain hose or pump, or the pump is broken. If a washer won’t drain or spin, the fix is simple if you’re even just a little bit handy with tools. We’re showing the repair on a Maytag washing machine. Remove the front panel screws.
The drain control mechanism allows water to drain out of the washing machine correctly. If the drain control is broken or the drain is clogged, the washing water won’t be able to escape and the washing machine will stall trying to start the rinse cycle.
What should I do if my washing machine won’t drain?
If you find anything, remove it to see if you can get the washing machine to drain. Be aware that if you remove the hose to get an obstruction out of the pump, any water in the washer will come pouring out. To avoid a mess, scoop out as much water from the drum as possible before disconnecting the hose.
Why does my washing machine spin but my clothes are still wet?
Washing Machine Drain Pump Clogged or Faulty If your washer will not spin out all water and clothes are still wet, the drain pump might be clogged with debris or possibly faulty. There could be a foreign object that is stuck in the pump and inside the drain hose.
Why is the drain hose too high on my washing machine?
If the drain hose is mounted too high, then the dirty water will flow into the washer after the completion of the drain cycle. Thus the hose need not be mounted higher. It should be lower than the top of the back of the washing machine. The drive belt is regarded as the soul and heart of the washing machine.