Why is no water coming out of my electric shower?
Why is no water coming out of my electric shower?
Number 1: There is no water coming from the shower at all, or it stops and starts. This is it, the most common fault with electric showers – the solenoid valve. If you find the shower stops working completely, or indeed cuts off (very often when you have soap in your hair) this is the culprit.
Why is my shower blowing the fuse?
If it’s tripping your fuse box then it’s probably a heating element fault, possible short circuit at high temp / small crack in heating element. You could try running the shower on the lowest temperature for a while to see if it’s related to heating, if it is, it’s probably a new shower.
Why is there no water coming out of my shower?
Number 1: There is no water coming from the shower at all, or it stops and starts. This is it, the most common fault with electric showers – the solenoid valve. If you find the shower stops working completely, or indeed cuts off (very often when you have soap in your hair) this is the culprit. It’s usually the coil that breaks down.
What does it mean when your electric shower stops working?
My electric shower, Mira Go 8.5, has suddenly stopped working. It was fine the day before. There is power to the unit, but the orange light comes on when you pull the pull main cord on, and the light stays on whether the on/off button on the unit is pressed on or off. No water comes out.
What is the solenoid resistance for an electric shower?
Solenoid resistance is 3.49, which should be ok, but no water, no sound, nowt. If there is power to electric shower, but the water is not coming out, this can be either an electrical contact problem or the PCB as gained a fault which you may need to replace.
What causes an electric shower to go cold?
A typical electric shower microswitch damaged by heat. If your shower is going hot and cold, it’s usually caused by not enough water getting to the shower. So first of all check that the valve coming into your house is fully open and the valve on the line to the shower is fully open.
How to fix Mira Power shower no water?
Mira power shower fix repair, pump working fine No water. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.
Number 1: There is no water coming from the shower at all, or it stops and starts. This is it, the most common fault with electric showers – the solenoid valve. If you find the shower stops working completely, or indeed cuts off (very often when you have soap in your hair) this is the culprit. It’s usually the coil that breaks down.
My electric shower, Mira Go 8.5, has suddenly stopped working. It was fine the day before. There is power to the unit, but the orange light comes on when you pull the pull main cord on, and the light stays on whether the on/off button on the unit is pressed on or off. No water comes out.
Solenoid resistance is 3.49, which should be ok, but no water, no sound, nowt. If there is power to electric shower, but the water is not coming out, this can be either an electrical contact problem or the PCB as gained a fault which you may need to replace.