Why is the water in my washing machine not draining?

Why is the water in my washing machine not draining?

There are a few possibilities why your washing machine won’t drain. Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed.

What do you do when your washing machine won’t drain the water?

What to Do When Your Washing Machine Won’t Drain

1. Perform a Master Reset. Unplug your washer for about one minute.
2. Test the Lid Switch Assembly.
3. See if the Drain Hose is Kinked.
4. Check the Drain Hose or Pump for Clogs.
5. Clean out the Coin Trap.
6. Check the Water Level Control.
7. Schedule Washing Machine Repair.

How do you unblock the waste pipe on a Hotpoint washing machine?

How to unblock Your Washing Machine (8 Easy Steps):

1. Turn your washing machine off at the plug.
2. Locate the pump filter.
3. Place a bucket, towel or even a baking tray under the pump filter.
4. Unscrew the pump filter SLOWLY.
5. Wait for the water to finish draining.
6. Check to see if there is a block.

How do you reset a Hotpoint washing machine?

Locate the “On/Off” button. You can find the button on the left side of the control panel. Press and hold the “On/Off” button. Release the button after three seconds.

Why is my hot point washing machine not draining?

It is also important to check the drain hose to ensure this is not blocked, kinked or bent as this can prevent the water draining out of your Hotpoint washing machine. If your appliance empties into a stand-pipe, ensure the drain hose is not pushed in by more than 4 inches.

What to do if your washing machine is not draining?

NOTE: If the drain pump is running it is not siphoning. If siphoning is occurring with your washer, first check the drain pump to make sure nothing is jammed or stuck within it or in a hose next to it. If the drain pump is NOT in working order, replace the drain pump after testing it with a multimeter.

What do I need to know about my hot point washing machine?

Remember some concentrated conditioners need to be diluted by mixing them with water prior to the start of the programme. Finally check that the feet are level and the Hotpoint washing machine is not too low at the front as this could prevent the fabric conditioner being rinsed away.

Why does my washer pump keep draining water?

The thermostat is faulty and overheating thus causing the washer to energize the pump and drain out water. If the water coming into your washer is not being PUMPED out by the drain pump but does DRAIN OUT than this means the pump is stuck open and draining all the time or constant draining.

Why does my hot point washer not drain?

Common solutions for: Hotpoint Washer won’t drain 01 – Drain Pump Sometimes, small objects or articles of clothing can get caught in the drain pump. To determine if anything is blocking the drain pump, remove the drain pump and check the pump for obstructions.

NOTE: If the drain pump is running it is not siphoning. If siphoning is occurring with your washer, first check the drain pump to make sure nothing is jammed or stuck within it or in a hose next to it. If the drain pump is NOT in working order, replace the drain pump after testing it with a multimeter.

The thermostat is faulty and overheating thus causing the washer to energize the pump and drain out water. If the water coming into your washer is not being PUMPED out by the drain pump but does DRAIN OUT than this means the pump is stuck open and draining all the time or constant draining.

Remember some concentrated conditioners need to be diluted by mixing them with water prior to the start of the programme. Finally check that the feet are level and the Hotpoint washing machine is not too low at the front as this could prevent the fabric conditioner being rinsed away.