How do you remove a stuck crimping tool?

The crimping die usually drops when the hex screw is removed. However, if the upper crimping die is stuck, loosen it by lightly tapping the die with the butt of a screwdriver handle or rubber hammer. Note: The plate on the die can be removed using a pair of grip lock pliers if a battery case is stuck in the plate.

Which DMC crimp tool features a system of interchangeable dies?

DMC HX4
The DMC HX4 and HX3 series crimp tools feature a system of interchangeable dies which eliminate the need of separate fixed die crimp tools for each and every different application.

How do you use a hand crimp tool?

Place the crimp bead on its side at the tip of the crimping tool. The nest at the tip looks like an oval from the side of the tool. Squeeze the tool again to further bend the crimp bead and secure the jump ring or clasp at the end of the wire. You can snip off the excess wire where you won’t put beads.

How do you manually release a crimping tool?

Open the tool by squeezing the handles together, at the end of the closing stroke, the ratchet mechanism will release the handles, and the hand tool will spring open.

WHAT IS A crimp tool positioner?

Crimp Tool Positioners are parts of a Crimping tool designed to adapt the tool frame to a particular application. Available in a wide selection of sizes and shapes locators guarantee versatility of every crimping tool.

What is crimping test?

Crimped pull testers, or crimp pull test equipment, measures the tensile force required to detach a crimped ferrule, terminal or connector from a wire.

Can you Uncrimp a wire crimp?

If so then just open up the flap that covers the metal piece and pry open one of the sides and it will come apart. If you are talking about the ones where they actually strip the wires and use a crimping tool then you could just take some pliers to uncrimp it or just cut it and strip the wires.