Info

The hedgehog was engaged in a fight with

Read More
Trending

How much does it cost to have someone install a toilet?

How much does it cost to have someone install a toilet?

National Average: $372 According to HomeAdvisor, toilet installation costs range from $224 to $531, with the national average at $372. The overall cost depends on the type of toilet and the complexity of the job. It takes approximately 2 to 4 hours for a plumber to install a toilet at a base rate of $65 per hour.

What is the difference between close coupled and back to wall toilets?

Close coupled – where the cistern sits directly on the back of the toilet pan. Back to wall – where the toilet pan fits against the wall or a piece of furniture and a concealed cistern provides the water for flushing.

Can I install a toilet myself?

All you need are a few hours, a helper and the right tools and toilet parts for the job. Before you begin learning how to install a toilet, choose your new toilet and, if you aren’t replacing an existing toilet, make sure you have plumbing ready for the new installation.

How to install a close coupled toilet in Australia?

In Australia any plumbing work, like installing a close coupled toilet, must legally be carried out by a licensed plumber. They would start by assembling the flush mechanism, installing it into the cistern. The next step is to hang the cistern with screws onto the wall.

What is the difference between close coupled and back to wall?

Unlike a close coupled toilet a back to wall toilet does not have the cistern integrated or attached. Instead it is often integrated into the wall, which is a great space saving measure. It also looks more modern and sleek if the cistern is not visible.

How does a close coupled toilet cistern work?

There are no pipes connecting the cistern and the pan in a close coupled toilet as the cistern flows directly into the toilet bowl. The flush buttons are mounted either on top of or on the side of the cistern for easy access. Read: What is a toilet cistern? Close coupled toilet cisterns are popular for a number of reasons.

What is the best type of toilet to install?

Close coupled toilets are also the most affordable style of toilet and the least complicated type of toilet to retrofit, so they are easy to install. Close coupled toilets are also very water efficient, and all should now be WELS rated with a dual flush action.

Previous Post

Next Post

Lifehacks

How much does it cost to have someone install a toilet?

How much does it cost to have someone install a toilet?

Toilet installation costs around $372, with most people paying between $224 and $531 for a full toilet replacement, depending on the type of toilet and the difficulty of the job. This includes the cost of the toilet, labor and equipment needed for the installation.

Can a handyman install a toilet?

A qualified handyman, though, can often tackle in one visit several smaller projects that don’t require licensing. “And even most of the electrical and plumbing we can do without licensing. For plumbing, a license is required if you’re changing lines, but we can install a toilet.

Can I use a 10 inch rough in toilet?

Rough-in is the measurement from the baseboard to the back bolt. Back bolts mount the toilet to the floor, holding it in place. It’s usually 12 inches, but it can be 10 inches for small bathrooms or 14 inches for larger ones.

Can you replace a 12-inch rough-in toilet with a 10-inch?

A toilet with a 12-inch rough-in will definitely not fit into a space with a 10-inch rough-in, but a toilet with a 10-inch rough-in actually has extra space in a 12-inch rough-in space.

Does Kohler make a 10-inch rough-in toilet?

KOHLERHighline Classic Comfort Height 10 in. Rough-In 2-Piece 1.28 GPF Single Flush Elongated Toilet in White.

How big of a rough in do you need for a toilet?

In old homes you will at times find toilets with a rough-in of 10 inches or even 14 inches. A toilet with a rough-in of 10 inches can only be replaced by a toilet with a 10-inch rough-in. A 14-inch rough-in toilet can be replaced by a toilet with a rough-in of 12 inches but a 2-inch gap will be left between the tank and the wall.

How big of a toilet do I need at Home Depot?

If you have an older toilet with four bolts, measure from the wall to the rear bolts to get the rough-in. Standard rough-in sizes are 10, 12, and 14 inches. Round down to the nearest standard size. I’ve purchased a toilet from another retailer. Can you install it for me? No.

Can a 14 inch toilet be replaced with a 10 inch in?

A toilet with a rough-in of 10 inches can only be replaced by a toilet with a 10-inch rough-in. A 14-inch rough-in toilet can be replaced by a toilet with a rough-in of 12 inches but a 2-inch gap will be left between the tank and the wall.

Which is easier to install, two piece toilet or 10 inch?

The 10-inch rough-in one-piece toilet is easier to install and maintain as opposed to the two-piece option. But any 10-inch toilet is quite easy to install if you have the necessary knowledge – the method is very similar to mounting traditional toilets.

In old homes you will at times find toilets with a rough-in of 10 inches or even 14 inches. A toilet with a rough-in of 10 inches can only be replaced by a toilet with a 10-inch rough-in. A 14-inch rough-in toilet can be replaced by a toilet with a rough-in of 12 inches but a 2-inch gap will be left between the tank and the wall.

If you have an older toilet with four bolts, measure from the wall to the rear bolts to get the rough-in. Standard rough-in sizes are 10, 12, and 14 inches. Round down to the nearest standard size. I’ve purchased a toilet from another retailer. Can you install it for me? No.

A toilet with a rough-in of 10 inches can only be replaced by a toilet with a 10-inch rough-in. A 14-inch rough-in toilet can be replaced by a toilet with a rough-in of 12 inches but a 2-inch gap will be left between the tank and the wall.

The 10-inch rough-in one-piece toilet is easier to install and maintain as opposed to the two-piece option. But any 10-inch toilet is quite easy to install if you have the necessary knowledge – the method is very similar to mounting traditional toilets.

Previous Post

Next Post

Copyright All rights reserved | The Words - By Themesarray.