How do you fix a printer that has a paper jam?

Remove the paper following the procedure below.

Slowly pull the paper out, either from the Rear Tray or from the Paper Output Slot, whichever is easier.
Open the Rear Cover.
Pull the paper out slowly.
Close the Rear Cover.
Reload the paper, and press the RESUME/CANCEL button on the printer.

How do you clear a paper jam on a Samsung m2070?

Use caution when removing paper from the printer.

Open the scan unit.
Open the jam cover.
Open the fuser dummy cover.
Remove the jammed paper by gently pulling it straight out.
Close the fuser dummy cover.
Close the jam cover (1), then close the scanner unit (2).
Open the scan unit.
Open the middle cover.

How do I fix error m2 1317?

The #m2-1317 error indicates a paper jam in the fuser area. Paper dust can also cause this. If you are sure that nothing is stuck inside it then there may be dust on the paper jam sensor, or the sensor may be faulty. Try disassembling the printer and remove the toner and fuser unit.

Why does my printer say paper jam when there is no paper jam?

The guides in the paper tray are there to make sure the stack of paper is exactly where the printer was designed to grab from. So even though there’s no paper stuck when you start printing, the loose paper guides are ensuring that a sheet gets jammed whenever the printer starts doing its thing.

What causes printer to jam?

Improperly Loading Paper into the Device Loading paper that is stuck together, frayed, curled or bent can cause a jam. Overloading the paper tray, loading different thicknesses of paper in the tray or using paper that isn’t appropriate for your particular printer can all result in a jammed printer.