What does Hg and he mean on a thermostat?

What does Hg and he mean on a thermostat?

NOTE: “HG” position is for gas and most other systems. “HE” posi- tion is for certain electric systems having a fan relay. • System Selector (STANDARD – HEAT PUMP switch) The factory position for this switch is in the STD position.

How do you reset a Braeburn 1020 thermostat?

To reset a Braeburn thermostat, press the RESET button located inside a small hole on the front side of the thermostat using a toothpick, a paper clip, or a pin.

Why is my Braeburn thermostat not working?

Check and Replace the Batteries So, the first step to try if your thermostat isn’t working is to check the batteries. If the low battery warning is flashing on the display, then you need to get the batteries replaced. You may refer to your user manual to see recommended batteries for your Braeburn thermostat model.

How do I set my Braeburn thermostat?

How to set a Braeburn thermostat?

1. Push the date/time button and set the correct date and time. Begin by choosing the hour, then the minutes.
2. Next, select the day of the week. You do this by pressing the arrows.
3. Push the fan button to select your fan setting.
4. To finish, press return and hold it for four seconds.

What does SS and HP mean on a thermostat?

SS/HP Switch (Conventional or Heat Pump Selection) The SS/HP switch is factory set to the SS position. In this posi- tion, thermostat is configured as conventional single stage. If you have a single stage heat pump system, switch SS/HP to HP position (see figure 2).

What is OB on a thermostat?

The O/B terminal is for heat pump systems and is used for the reversing valve. When the “O” option/position is selected the reversing valve defaults to the heating mode. If you get it reversed the heat pump will cool in the heat mode, and heat in the cool mode.

How do I set my Braeburn thermostat to manual?

Braeburn Thermostat Instructions

1. Press the “Date/Time” button on the keypad to set the day and time of your thermostat.
2. Press the “Fan” button repeatedly to scroll through the different fan settings.
3. Press and hold the “Return” button for four seconds.
4. Press the “Prog” button to enter program setting mode.

Does my Braeburn thermostat need batteries?

Some Braeburn thermostats require 2 “AA” alkaline batteries while many newer models can be battery operated, directly wired (hardwired) or both. Check your user manual for specific instructions.

How do I unlock my Braeburn thermostat?

To lock or unlock the thermostat, press and hold the NEXT and RETURN buttons together for 5 seconds (Figure 1). The screen will change, displaying 000 and LOCK will be flashing (Figure 2).

What temperature should I set my thermostat?

According to ENERGY STAR, setting your thermostat to 68 degrees Fahrenheit (20 degrees Celsius) when you’re home is the ideal balance of comfort and energy efficiency.