What is the difference between DIN 912 and ISO 4762?

DIN 912 and ISO 4762 are equivalent standards, with the only difference in the standards themselves being that some nominal sizes were cut and that a fine thread standard (ISO 12474) was created.

What does DIN mean on bolts?

Deutsches Institut für Normung
DIN stands for “Deutsches Institut für Normung“, meaning “German institute for standardisation”. National standards (DIN) will be/have been largely replaced by international/European standards. DIN standards are still valid for products having no ISO or EN standards.

What is DIN standard for fasteners?

General Fastener Standards

DIN Standard	ISO Standard	Product
DIN 1	ISO 2339	Cone Pins, untempered
DIN 125	ISO 7089	Washers; medium type, primarily for hexagon bolts
DIN 125	ISO 7090	Washers; medium type, primarily for hexagon bolts
DIN 126	ISO 7091	Product grade C washers – designed for use with hexagon head bolts and nut

What is the difference between DIN 931 and 933?

As we already know, DIN 933 is a full thread hex head cap screw with coarse thread pitch, whereas DIN 931 is a partial thread hex head cap screw with coarse thread pitch.

Is DIN 912 fully threaded?

Socket Head Cap Screws With Full Thread DIN 912 (ISO 4762) M10 in A2 Stainless Steel. This variant is supplied fully threaded regardless of length of screw.

What is difference between ISO and DIN?

STANDARDS – ISO / BS / DIN With reference to fasteners, DIN number indicates the that the part conforms to a specific metric standard. The International Standards Organisation (ISO) standard has evolved to supersede the DIN standard, which was historically the predominant metric fastener system referred to.

Is ISO and DIN the same?

ISO Standards are those issued by the International Standards Organisation, whilst DIN Standards are issued by the German equivalent of British Standards (BS).

What is the difference between ISO and DIN?

Is Din 933 full thread?

DIN 933 Hex Head Cap Screws are fully threaded, have external coarse machine screw threads and, like other hex head screws, are used with both tapped holes and nuts. Class 8.8 and 10.9 thread tolerance for plain finish is 6g and 6h for plated; stainless steel is 6g; right-hand threads are standard.

Is standard for socket head cap screw?

The most common standard Socket Cap Screw is to DIN 912 in 12.9 grade, also available in 8.8 and 10.9 and in A2 and A4 stainless steel.

What does DIN stand for?

DIN

Acronym	Definition
DIN	Data Identification Number
DIN	Defense Intelligence Notice
DIN	Designee Information Network
DIN	Deutsche Industrial Norms (German standards agency)

What is DIN in material?

DIN stands for “Deutsches Institut für Normung”, which means “German institute for Standardization”. DIN type tube fittings conform to the requirements of ISO 8434-1, DIN 2353, and DIN EN 3850 standards. This ensures the interchangeability with leading brands of fittings.

What is the difference between ISO 4762 and Din 912?

ISO 4762 is standard of Hexagon socket head cap screws. ISO 4762 and DIN 912 is interchangeable. ISO 4762 and DIN 912 has the same material, dimensions, length tolerance, thread length, torque etc.

What is the difference between ISO 12474 and ISO 4762?

DIN 912 and ISO 4762 are equivalent standards, with the only difference in the standards themselves being that some nominal sizes were cut and that a fine thread standard (ISO 12474) was created.

What is the fine thread equivalent to ISO 4762?

The fine thread equivalent to ISO 4762 is ISO 12474. So, if you are looking for a fine thread socket head cap screw, then you’ve actually got a specific standard for that now, ISO 12474. So, that’s it for today!

What is the isoiso 4762 standard for hexagon socket head cap screws?

ISO 4762 International Standard specifies the characteristics of hexagon socket head cap screws with coarse pitch thread from M1,6 up to and including M64 and product grade A.